Struck by running powered equipment during maintenance, cleaning, testing · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Mohawk Industries, 106 John Bankson Dr, SUMMERVILLE, GEORGIA 30747
on — Fractures , affecting the Multiple arm locations.
Final narrative
On May 27, 2025, an employee had been sweeping the floor around the sort and grind line conveyor. She was wiping down the frame of the conveyor when her right arm was drawn up between the conveyor belt and the snub roller underneath the conveyor. She sustained fractures to her upper and lower arm.
Hospitalized Multiple arm locations Conveyors belt, slot, chain
On July 12, 2023, a maintenance employee was troubleshooting the actuator valve on a robot cell for the binder material gravity-feed system. He was checking the valve for clogs or debris when his right index finger was caught by the actuated ball valve, causing a partial fingertip amputation.
An employee was in the trailer pulling a piece of rolled product off the trailer when he lost his footing and fell onto the concrete ground. It was raining and the back of the trailer was wet at the time. The employee sustained fractures to the left femur and left wrist requiring hospitalization and surgery.
An employee was performing maintenance on a yarn twister machine. When the employee started up the machine, it caught and amputated the employee's left little finger.
Two machine operators were clearing a jam in a feeder machine. When the jam was removed the lever that drops the feeder chains was activated and the feeder chains dropped on the injured employee's left hand. The injured employee sustained deep puncture/lacerations and a compression injury to the left hand.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 314110)
On September 10, 2025, an employee was working to fix a slipping carpet on a conveyor. He went to lift the carpet and put it back on the top rail when the conveyor belt caught his right hand and a roller subsequently caught his arm. The employee was hospitalized with a broken forearm.
On July 31, 2025, two employees were walking near a friction wash tank when a rubber gasket on top of the tank blew. Hot water mixed with 50% caustic chemical sprayed out and rained down on the employees. Both employees were brought to an emergency shower and were neutralized with vinegar. One employee was hospitalized with chemical and thermal burns to their upper back and eyes.
On January 29, 2025, an employee was operating an extrusion machine. He put a broken piece of yarn on the secondary roller and his glove was pulled into the nip rollers. The employee's left little fingertip was partially amputated.
On December 20, 2024, an employee was preparing to remove the access panel for the rotary valve gear box underneath a washer in polymerization. When he began loosening the bolts from the rotary lock cover, hot water and steam pressure released and caused second-degree burns to the employees stomach, both thighs, and the left calf area.
An employee was performing maintenance on a roller machine to clean a clogged vacuum hose under the roller. The employee turned the roller machine off. The rollers continued to move due to residual energy and caught the employee's left middle finger, causing a fingertip amputation. The machine was not locked out/tagged out or guarded at the time.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.