Caught in running equipment or machinery during regular operation · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Moderne Glass Co., 1000 Industrial Boulevard, ALIQUIPPA, PENNSYLVANIA 15001
on — Fractures, affecting the arm(s), unspecified.
Final narrative
An employee was operating a screening machine. He was removing a dropped rag from the machine when his arm was caught and broken between a rotating bar and a stationary part in the machine.
HospitalizedArm(s), unspecifiedSpecial process machinery, unspecified
An employee was imprinting coffee mugs using a screening machine when a piece of paper fell out of the cup. The employee went to retrieve the piece of paper and the screening machine pushed her right hand against the wall of the machine. The employee sustained compartment syndrome in her right forearm.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 541430)
An employee was imprinting coffee mugs using a screening machine when a piece of paper fell out of the cup. The employee went to retrieve the piece of paper and the screening machine pushed her right hand against the wall of the machine. The employee sustained compartment syndrome in her right forearm.
An employee was performing maintenance tasks on a roof in the rain. As the employee was descending the ladder, he slipped off a rung and fell, landing on both feet. The employee's right heel and left ankle were fractured.
An employee was in an aerial lift's metal bucket, installing a banner on the side of a building. The employee finished placing the banner and pulled back to take a picture. The aerial lift came into contact with a power line; the employee was shocked, suffering second-degree burns to the chest and head.
Two electricians/journeyman mechanics were doing preventative maintenance on a high-density storage system, an aisle with two cranes. They were preparing to lubricate the chains on one of the cranes. One of them was on the lift station, seated above the crane on a cross-support bar to perform lubrication and test the vertical limit switch. He tripped the vertical limit switch to begin the work. The crane and the lift station began to move up, and his right leg was pinned and broken between the frame of the crane and the crossbar of the lift station.
An employee was wrapping a box of shrink wrap using green banding. While moving around the box, the employee slipped on some of the shrink wrap causing him to fall on his right hip. The employee was hospitalized with a broken right hip.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.