Moderne Glass Co.

An employee was operating a screening machine. He was removing a dropped rag from the machine when his arm was caught and broken between a rotating bar and a stationary part in the machine.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.

An employee was performing maintenance tasks on a roof in the rain. As the employee was descending the ladder, he slipped off a rung and fell, landing on both feet. The employee's right heel and left ankle were fractured.

An employee was operating a screening machine. He was removing a dropped rag from the machine when his arm was caught and broken between a rotating bar and a stationary part in the machine.

An employee was in an aerial lift's metal bucket, installing a banner on the side of a building. The employee finished placing the banner and pulled back to take a picture. The aerial lift came into contact with a power line; the employee was shocked, suffering second-degree burns to the chest and head.

Two electricians/journeyman mechanics were doing preventative maintenance on a high-density storage system, an aisle with two cranes. They were preparing to lubricate the chains on one of the cranes. One of them was on the lift station, seated above the crane on a cross-support bar to perform lubrication and test the vertical limit switch. He tripped the vertical limit switch to begin the work. The crane and the lift station began to move up, and his right leg was pinned and broken between the frame of the crane and the crossbar of the lift station.

An employee was wrapping a box of shrink wrap using green banding. While moving around the box, the employee slipped on some of the shrink wrap causing him to fall on his right hip. The employee was hospitalized with a broken right hip.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.