RHOME, TEXAS—
Kyle Erwin Construction LLC
Fire, unspecified · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Kyle Erwin Construction LLC, 270 County Road 4668, RHOME, TEXAS 76078 on — Heat (thermal) burns, unspecified, affecting the multiple body parts, n.e.c..
Watch Kyle Erwin Construction LLC — free
Get an email when a new federal OSHA severe-injury report for Kyle Erwin Construction LLC is published. One employer, no account, unsubscribe in one click.
Final narrative
A crew was removing bolts from the pump's spool piece and rigging the hoist to hold the elevated spool piece out. The crew replaced the witch's hat inside the pump and began to reinstall the spool piece when a burst of fire came out of the pipe and struck the injured employee's face and hand resulting in burns.
Similar incidents · Same event type
PORT ARTHUR, TEXAS—
Cleveland Integrity Services, LLC
An employee was performing oversight for the welding of a pipeline launcher door on a construction project. Two welders were performing arc welding, one on the interior diameter of the pipeline launcher door, and the other on the outside diameter of the launcher door when a flash fire occurred. The injured employee sustained first- and second-degree burns to the face, neck, back, and hands.
JEWETT, TEXAS—
Martin Specialty Coatings, L.L.C.
While on a scissor lift, an employee was grinding a steel pipe. Sparks from the grinder ignited some nearby rags that had been used to apply coating treatments to the pipe. This fire subsequently ignited the employee's clothing. The employee sustained burns to approximately 46% of their body and was hospitalized.
GARDEN CITY, TEXAS—
Wildcat Oil Tools
An employee was working in an area where another company was also working. The other company's employees were using an electric hydraulic pump to remove the bolts of the frac valve. The wiring of the torque wrench and pump unit were then charred and a flash fire occurred. The employee sustained second-degree burns to their face and neck.
SHEBOYGAN FALLS, WISCONSIN—
MilliporeSigma
On October 17, 2023, an employee was at a sink while using a solvent to unclog a vacuum trap dip tube that contained solids from pinacolborane distillation. During this process, the sink caught on fire and the solvent bottle containing tert-butyl methyl ether fell into the burning sink. The employee attempted to remove the solvent bottle which also caught on fire and suffered burns to their neck and left hand.
APPLE GROVE, WEST VIRGINIA—
M&G Polymers USA, LLC
An employee was under a railcar cleaning up dust with a vacuum hose. The hose caused a spark that caused a flash fire that ignited the employee's clothing. The employee sustained second- and third-degree burns over 83% of his body.
More severe injuries in this industry (NAICS 213111)
HANNIBAL, OHIO—
Hall Drilling, LLC
An employee was stepping down off a 6-inch containment platform to finish loading his truck, when his right ankle rolled. The employee sustained a fractured tibia and fibula at the right ankle and required surgery.
PILOT POINT, TEXAS—
C. Miller Drilling Inc
A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.
WATFORD CITY, NORTH DAKOTA—
Amercian Well Service Llp
An employee was working to remove a stuck fish tool from a drill shoe. Their thumb was struck by a hammer, resulting in amputation.
WICKETT, TEXAS—
Axis Energy Services
An employee arrived on location and loaded a blow-out-preventer (BOP) on a 1-ton flatbed truck. While standing on the flatbed securing the the BOP, the employee stepped into a void/hole on the flatbed surface. This caused him to lose balance and fall off the truck bed with his leg still caught in the hole. As a result, he sustained fractures to his left leg.
PECOS, TEXAS—
ROBINSON DRILLING OF TEXAS, LTD
An employee was rigging up a location. He was using an Allen wrench to free up rotation and start the drawworks engine manually. The engine rotated and his left little finger became caught between the Allen wrench and the engine. The employee sustained an amputation to his little finger and fractures to his wrist.
More severe injuries in TEXAS
EAST BERNARD, TEXAS—
T G Meat Center LLC
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
LUBBOCK, TEXAS—
Professional Flooring Supply
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
HOOKS, TEXAS—
EnviroSafe Demil LLC
An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.
LOLITA, TEXAS—
Inteplast Group
An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.
HALLETTSVILLE, TEXAS—
Regency IHS of Fairwinds Halletsville, LLC
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.