Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at PAC Machinery Bags and Materials, 7737 North 81st Street, MILWAUKEE, WISCONSIN 53223
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was clearing a jam on a machine when his right middle finger was pulled in by a running belt, resulting in the finger being crushed. The finger required surgery and was partially amputated. The machine was not guarded at the time of the incident.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326111)
At about 11:00 a.m. on August 17, 2025, a Sealer Air Corp. employee suffered a broken right tibia while stepping down from a conveyor to the floor 19 inches below.
An employee was troubleshooting around the secondary draw rollers of a bag machine when their left index, middle, and ring fingers contacted the rollers. The employee sustained a partial fingertip amputation to one of the fingers. The machine was not guarded at the time.
An employee was clearing a jam from the rewinder when their hand was pulled into a rotating part of the machine, fracturing one finger and dislocating another.
An employee was stepping down from a two-step ladder when the ladder slipped out from underneath them. The employee fell and landed on a sidekick trailer jack, resulting in four fractured ribs, including two ribs with multiple breaks, and a pulmonary contusion.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.