MARISCO LIMITED

An employee was in the dry dock working on a cement barge. While using an oxy-acetylene torch for gas cutting the employee began to suffer cramping due to heat exposure and dehydration. The employee was hospitalized.

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was struck by a plasma cutter and suffered a broken left tibia and fibula. The employee was hospitalized.

An employee was preparing to bend a flat bar in a brake press. When the machine was jogged, the stock rotated up and crushed his left middle fingertip against the outer frame of the die. The fingertip was amputated.

An employee was cutting metal with a torch. A piece of metal struck the employee's left foot, causing multiple fractures to metatarsal(s). The employee was hospitalized.

An employee was descending a ladder carrying a bag of trash. He fell, landed on the ground about 10 feet below, and suffered fractures to his right hip and pelvis.

An employee was on a 6-foot A-frame ladder, working to replace ceiling tiles. They fell to the ground and sustained fractures to their hip and femur. The employee was hospitalized and required surgery.

An employee was installing shoring and stepped on a 2x4 that was running across the top of a trench. He fell through and was hospitalized with a fractured left femur.

An employee was taking a break from powerwashing a deck when a door closed on his left index fingertip, resulting in an amputation above the nail.

An employee was securing a ramp to a dock to unload cargo. He was using large pins to put the ramp in place when two of his fingers got caught in the ramp, resulting in a partial amputation.

An employee was helping to dismantle a mobile crawler crane. Employees were separating boom sections. When the last pin was hammered out, the 40-foot boom section dropped 4-5 inches onto the injured employee's left foot. All five toes were amputated and the employee was hospitalized for surgery.