Fall from collapsing structure or equipment 16 to 20 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at M&E Demolition LLC, 18301 W Colfax, GOLDEN, COLORADO 80401
on — Fractures, affecting the multiple body parts, n.e.c..
Final narrative
An employee was working in a boom lift to help tear down a building. The employee stepped out of the boom lift and onto one of the trusses when the building collapsed, causing the employee to fall approximately 17 feet to the ground below. The employee sustained fractures to the wrist, hand, ribs, and face.
HospitalizedMultiple body parts, n.e.c.Building, unspecified
An employee was on top of a 2-by-4 purlin installing rafters. The purlin broke and he fell to the ground about 16 feet below, suffering a broken left femur.
An employee was climbing a power line pole when the pole broke at ground level while the employee was approximately 20 feet up. The employee rode the pole to the ground and sustained 12 broken ribs, a broken collarbone, and a punctured lung.
An employee was on a pallet that was being lifted by a forklift to a height of 20 feet. The pallet broke and the employee fell to the warehouse floor sustaining fractures to their nose, ribs, and ankle.
An employee was performing tuckpointing while on a swing-stage scaffold. The rope on the scaffold broke and the side of the scaffold fell 20 feet to the ground. The employee impacted the ground and sustained a broken ankle that required hospitalization and surgery.
An employee was standing at the top of the rig floor stairs guiding the rotary hose that was being hoisted with the rig winch. The hose was nearly at the rig floor when the wing half at the bottom of the hose was caught underneath the stairs. The stairs became disconnected from the rig floor and the employee at the top of the stairs fell approximately 15 to 18 feet to the ground.
More severe injuries in this industry (NAICS 238910)
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.
An employee was assisting the crew with patching and restoring a roadway after the installation of a sewer line. He was helping place and level the blacktop/backfill material over the trench area to bring the road surface back to proper grade. The employee was walking between a forward-moving dump truck and a dirt pile when his right foot was run over by the truck s wheel, causing him to fall. The employee sustained injury to his foot.
An employee was operating a skid steer with a bucket attachment at a demolition site. While driving it to the rear of the property to park it, the employee came into contact with a live electrical transformer unit that was located outside of the facility. The employee sustained electrical burns on his hands extending up to his elbows and a fractured ankle.
An employee was installing a door on a semi-trailer. They were using a forklift to lift the door to the height of the trailer when the door became jammed between the forklift mast and the hinge on the trailer. When the employee went to dislodge the door from the mast, the door fell and crushed their foot. Their big toe was amputated. The employee was hospitalized and their big toe was surgically reattached. The employee's foot and other toes also required surgery.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.