R&R Christo Construction

An employee was guiding a beam through a bracket when their finger was caught and fractured between the beam and bracket.

An employee was working in a boom lift to help tear down a building. The employee stepped out of the boom lift and onto one of the trusses when the building collapsed, causing the employee to fall approximately 17 feet to the ground below. The employee sustained fractures to the wrist, hand, ribs, and face.

An employee was climbing a power line pole when the pole broke at ground level while the employee was approximately 20 feet up. The employee rode the pole to the ground and sustained 12 broken ribs, a broken collarbone, and a punctured lung.

An employee was on a pallet that was being lifted by a forklift to a height of 20 feet. The pallet broke and the employee fell to the warehouse floor sustaining fractures to their nose, ribs, and ankle.

An employee was performing tuckpointing while on a swing-stage scaffold. The rope on the scaffold broke and the side of the scaffold fell 20 feet to the ground. The employee impacted the ground and sustained a broken ankle that required hospitalization and surgery.

An employee was standing at the top of the rig floor stairs guiding the rotary hose that was being hoisted with the rig winch. The hose was nearly at the rig floor when the wing half at the bottom of the hose was caught underneath the stairs. The stairs became disconnected from the rig floor and the employee at the top of the stairs fell approximately 15 to 18 feet to the ground.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was installing insulation in a wall when she tripped on a hole (12" deep) and fell, hitting her head on the concrete floor. The employee sustained fractures to her leg and wrist, and lacerations to her head. The employee was hospitalized.

An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.

An employee was operating a power drill when it slipped. The drill bit punctured the employee's hand and they were hospitalized.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.