BIRMINGHAM, ALABAMA—
Kamtek, Inc.
Fall onto or against object on same level, n.e.c. · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury at Kamtek, Inc., 1595 Sterilite Drive, BIRMINGHAM, ALABAMA 35215 on — Cuts, lacerations, affecting the wrist(s).
Final narrative
An employee was walking in a forklift area. The employee tripped, fell into a rack of stored aluminum stampings, and suffered a laceration to his wrist from one of the stampings. The employee was hospitalized.
More severe injuries at Kamtek, Inc.
BIRMINGHAM, ALABAMA—
Kamtek, Inc.
An employee was adjusting a metal coil on a press when his left hand became caught between the arm of the coil holder and the coil. Their thumb was cut and partially amputated.
BIRMINGHAM, ALABAMA—
Kamtek, Inc.
An employee was removing a scrap bun from a scrap conveyor when a part of the scrap struck their left middle fingertip against another part, resulting in an amputation.
BIRMINGHAM, ALABAMA—
Kamtek, Inc.
An employee was changing out auto parts on stamping racks when a part fell out of the rack. The employee got off the lift she was operating and tried to place the part back on the rack when the part cut her index and middle fingers.
BIRMINGHAM, ALABAMA—
Kamtek, Inc.
An employee was feeding a sheet of metal into a shear machine when his finger came in contact with a spring in the machine, resulting in a left middle finger amputation.
View Kamtek, Inc.'s full OSHA safety record →
Similar incidents · Same event type
SUNRISE, FLORIDA—
Natures Products, Inc.
An employee was on a two-step ladder performing cleaning activities in the de-oiler machine. The employee fell back and his right arm was caught in the equipment, resulting in a right forearm fracture that required surgery.
GARLAND, TEXAS—
General Dynamics Ordnance And Tactical Systems, Inc.
An employee was changing an insert in the tool head of a CNC machine. The employee had stepped up approximately 28 inches onto the door track of the machine. When the employee went to step back down to the floor, they lost balance and fell backward onto a rack of metal parts. The employee sustained a compression fracture to the spine.
SAN ANTONIO, TEXAS—
Coilplus Inc.
An employee was packaging steel coils on a turntable. As he walked across the turntable, he slipped and fell onto a coil. His left bicep was lacerated by the slit edge of a coil.
NORTH LITTLE ROCK, ARKANSAS—
Commercial Lumber Sales Inc
An employee was monitoring a lumber-stacking machine when they slipped and fell into an unbanded bundle of lumber. The outer row of lumber then fell on their left leg, fracturing their leg and ankle.
PENSACOLA, FLORIDA—
The Hiller Companies, LLC
An employee was putting parts away in a warehouse. He tripped and fell into metal shelving, resulting in a broken arm.
More severe injuries in this industry (NAICS 336370)
CORRY, PENNSYLVANIA—
Associated Metal Forming Technologies
An employee was verifying light curtain function at a load cell tester when their right index finger was amputated by a hydraulic cylinder above the middle knuckle.
OTTOVILLE, OHIO—
Progressive Stamping, Inc.
An employee was positioning an overhead crane to stand up a skidded coil when the coil swung back. The employee was caught between the swinging coil and another coil sitting on a coil pad, resulting in hospitalization due to a loss of consciousness and a pelvic injury.
SOUTH CHARLESTON, WEST VIRGINIA—
Gestamp
An employee was performing general cleanup duties when they collapsed and passed out due to heat exhaustion. They were hospitalized for heat exhaustion, dehydration, and acute renal failure.
WEST JEFFERSON, OHIO—
Jefferson Industries
A temporary employee was helping a forklift operator by holding metal sheets to steady them as they were placed on a rail for feeding to a stamp machine. The operator lowered the forks with the blanks (weighting approximately 750 pounds). The temporary employee's right index finger was caught between the metal and the feeding rail. The finger was crushed and partially amputated through the bone.
UTICA, NEW YORK—
Utica Metal Products, INC.
An employee was using a mechanical trim press to trim flash off metal parts. The employee was loading a part to be trimmed when the press cycled and crushed the index fingers on both of their hands. The employee sustained a fingertip amputation. The machine was not guarded at the time.
More severe injuries in ALABAMA
GENEVA, ALABAMA—
Sysco Gulf Coast, LLC
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
ANNISTON, ALABAMA—
Ampler Pizza II LLC
An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.
ATMORE, ALABAMA—
Birdsong Corporation
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
ROGERSVILLE, ALABAMA—
Pilgrims
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.