Sewell Products of Florida, LLC

An employee was removing a piece of plastic from a molding machine. The machine was activated, causing the molding pin to come down onto the employee's finger. The skin on her finger was removed and part of her finger was medically amputated.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was using an electric pallet jack to retrieve a chemical tote from a staging lane. He inserted the pallet jack under the tote and began to back up. After moving backward for approximately 15 feet, the employee tripped on a collapsible tote. As he fell, the pallet jack ran over his left foot. His ankle was lacerated and his foot was fractured.

An employee was installing network infrastructure at a client's distribution center. He was transporting a box measuring approximately 23 inches by 12 inches to a truck yard and walking along a narrow path adjacent to a trench that measured approximately 5.5 to 6 feet deep, 10 to 12 feet long, and 18 to 24 inches wide. Gravel on the path shifted beneath the employee's foot, causing him to lose balance and fall into the trench. He landed on his left side and struck a 4-inch PVC conduit pipe located at the bottom of the trench. The employee was hospitalized with fractures to his fourth, fifth, and sixth ribs on the left side.

An employee mixed sodium hydroxide pellets into a 55-gallon drum of hot water. A chemical reaction occurred and mixture splashed out of the drum, causing burns to the employee's face and neck. Personal protective equipment was not in place at the time.

An employee was cleaning a centrifugal pump. As he was cleaning a nozzle, his hand was caught in the inlet of the pump. He suffered a partial fingertip amputation.

A line leader was crouched down observing the chain and sprocket on a carpet filling machine for maintenance or repair when another employee got his right index finger caught between the chain and sprocket. Skin and the fingernail were removed and the employee required surgical amputation of the fingertip to the first knuckle.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.