HP Hood LLC

An employee climbed on top of a roller conveyor to visually assess a suspected fractured pallet that was being conveyed to the finished products warehouse. The employee's safety toecap of his boot got caught in a 4-inch-wide gap separating sections of the conveyor rollers, causing him to twist his leg and fall. The employee suffered a fractured femur and finger.

An employee was exiting a jockey truck when his foot got stuck on a step, causing him to fall to the ground. The employee sustained a fractured right leg.

A mechanic was performing preventative maintenance on a robot. The employee noticed the right grease port next to the pallet pusher bar was blocked, so they notified the operator. The employee moved to the next grease port as the operator moved the pusher bar. The pusher bar then moved on both the left and right side in tandem, causing it to contact the mechanics right middle finger at the grease port hole. The employee suffered a middle fingertip amputation and a fracture to the tip of the bone.

An employee was collecting samples from a production line. The employee stepped on a cap, slipped, and fell, suffering an internal abdominal injury.

An employee was removing a clamp from a pipe connection. The pipe sprayed 200-degree water onto the employee, who suffered second-degree burns to the face and from the chest to the knees.

An employee was going to the breakroom when they tripped over a chair and fell, resulting in a hip fracture.

An employee arrived at work and was walking into the store through the parking lot. The employee tripped over a curb and fell to the ground, sustaining a femur fracture.

An employee tripped over a box and fell to the floor, fracturing their right arm.

An employee tripped over a piece of angle iron and fell to the floor sustaining a broken hip.

An employee was preparing for a CT scan when she tripped over a loose strap and fell to the floor, fracturing her hip.

An employee was performing rear brake shoe service on a truck. The employee was using a prybar to remove a spring when the spring slipped from the S-cam and amputated his left index fingertip.

An employee was unjamming a case that was stuck in a case washer machine when their pants became entangled in a chain, causing them to be sprayed with hot water from the machine. They employee suffered burns from the hot water.

An employee was cleaning out a butter fat tank. The employee slipped and fell, suffering a broken right leg.

An employee was clearing a cup jam on a cup conveyor when their left hand was caught between the conveyor and an idler roller located on another conveyor line directly above the jam. The employee received an abrasion and friction burn to the hand that required hospitalization.

An employee was performing routine maintenance on an air valve when their right ring finger became caught in the valve. The employee sustained an amputation to the fingertip.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.