105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

O'Neal Steel, LLC

Compressed or pinched by shifting objects or equipment · Fractures

Federal OSHA recorded a severe workplace injury at O'Neal Steel, LLC, 4005 Interstate 30 East, GRAND PRAIRIE, TEXAS 75050 on — Fractures, affecting the ankle(s).

An employee was unloading a carbon steel plate from a truck and moving it to a storage location. As the employee moved the hoist upward, one of the four hoisting devices was still engaged with material, causing the stack of plates to move. The employee's right ankle and foot were pinched, resulting in a right ankle fracture.

Hospitalized Ankle(s) Metal plates, metal panels

O'Neal Steel, LLC

An employee was separating two pieces of steel tubing from a bundle of four. The tubing fell; the employee's left thumb was caught between two pieces of it, and he suffered a laceration that included a ligament in the thumb. He was hospitalized, requiring surgery.

O'Neal Steel, LLC

An employee was removing an overhead crane chain from material that had been placed on a saw conveyor. The chain hook caught on the conveyor, then came loose and struck the employee. The employee suffered a fracture to the right side of the jaw.

O'Neal Steel, LLC

An employee was lifting steel plates with an overhead crane. The steel plates struck the employee in the face resulting in a broken jaw and fractured teeth.

O'Neal Steel, LLC

An employee was on top of a flatbed truck. The employee slipped and fell to the ground, suffering a broken wrist, eye socket, and ribs.

O'Neal Steel, LLC

An employee was using an overhead crane to put a piece of metal scrap in a dumpster. A stack of beams turned over and pinned the employee, injuring the employee's legs. The employee was hospitalized.

View O'Neal Steel, LLC's full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

Triad Metals International

A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.

Ryder System Inc.

An employee was on the deck of a trailer helping a customer unload tubes. The employee was working to place a cargo strap on the remaining tubes using a winch bar when it slipped off the tubing, causing him to lose his balance and fall headfirst onto the asphalt lot below. The employee suffered a contusion on his forehead, resulting in hospitalization.

EASTERN METAL SUPPLY, INC.

An employee and a customer were unloading two rectangular tubes. The tubes were wrapped together. The plastic wrap was cut so that one tube could be picked up. As the employee was lifting the top tube, the other tube (still connected to the top tube) came down onto his hand and broke two of his fingers. He was hospitalized.

TEXAS PIPE AND SUPPLY COMPANY

An employee was assisting as a forklift got pipe from a pipe rack. The employee was on one of the forklift's forks as it was raised to the top of the rack, a height of about 15 feet. He fell to the ground and suffered a dislocated and fractured right elbow.

United Performance Metals, LLC

On September 23, 2025, at approximately 7:43 p.m., an employee was using a knife to cut poly banding from a metal coil. The knife slipped, causing a laceration to the inside of their left arm at the elbow joint. The employee was hospitalized and required surgery to repair a damaged vein.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.