GREELEY, COLORADO—
Swift Beef Company
Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Swift Beef Company, 800 N 8th Avenue, GREELEY, COLORADO 80631 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was troubleshooting a palletizer. After completing maintenance, the employee was re-aligning the chain drive with another employee. The employees were jumping the chain and using a prybar to align it on the sprocket. The pry bar slipped and the injured employee's left middle finger was caught between the chain and sprocket, resulting in a fingertip amputation.
More severe injuries at Swift Beef Company
CACTUS, TEXAS—
Swift Beef Company
An employee was moving cattle when they were struck by a cow. The employee sustained two fractured ribs, a punctured lung, and internal bleeding.
GRAND ISLAND, NEBRASKA—
Swift Beef Company
An employee was working on a pump. When a cap was opened to prime the pump, pressurized steam was released and burned the left side of the employee's body. The employee was hospitalized.
CACTUS, TEXAS—
SWIFT BEEF COMPANY
An employee was repairing an auger when they sustained an amputation to the distal phalanx of their left index finger.
GRAND ISLAND, NEBRASKA—
Swift Beef Company
An employee was adjusting a rolling ladder when it caused an amputation to their right middle fingertip.
CACTUS, TEXAS—
Swift Beef Company
An employee was picking trim from a bucket when his right hand became caught in the skinner blade and roller, resulting in injuries to the index finger and thumb.
View Swift Beef Company's full OSHA safety record →
Similar incidents · Same event type
BANGOR, MAINE—
N. S. Giles Foundations, Inc.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
PERRY, OKLAHOMA—
Weld Mech, Inc.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
JEFFERSON CITY, MISSOURI—
Axium Packaging LLC
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
ASPEN, COLORADO—
PanTerra Energy
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
PITTSTON, PENNSYLVANIA—
Graphic Packaging International
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 311611)
AMARILLO, TEXAS—
Tyson Fresh Meats, Inc.
An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.
IDAHO FALLS, IDAHO—
Intermountain Packing, LLC
An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.
DODGE CITY, KANSAS—
Cargill Meat Solutions Corporation
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
SOUDERTON, PENNSYLVANIA—
JBS Souderton, Inc.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
CRETE, NEBRASKA—
Smithfield Foods
An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.
More severe injuries in COLORADO
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
LONGMONT, COLORADO—
Circle Graphics, Inc.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
DENVER, COLORADO—
FLATIRON CONSTRUCTION CORP.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.