Silgan Containers Manufacturing Corporation

A turret on a piece of trimmer equipment was being manually rotated into position while offline. An employee was helping move the turret when a pinch point on it caught his right hand. He suffered an amputation to the ring fingertip.

An employee was unclogging a scrap cyclone. The employee's finger was caught between a ladder and a dead blow hammer, and the fingertip was amputated.

An employee was removing a 25-pound cup conveyor part from a storage rack when he lost control of the part and it fell, crushing his finger between the part and the rack. He suffered a left index finger amputation.

An employee's right index finger was amputated at the first knuckle, resulting in overnight hospitalization.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was clearing a jam on a ring press. The press's secondary switch was activated, engaging it. It caught the employee's hand. The employee was hospitalized and sustained the amputation of two fingers. The machine was unguarded at the time of the incident.

An employee was adjusting an air line on a scroll shear when a rotating gear caught his right ring finger, resulting in a fingertip amputation.

An employee was checking a conveyor belt chain when his right index finger came into contact with the moving chain. He suffered a partial amputation to the right index finger.

On April 1, 2025, at 9:45 p.m. an employee's arm was pulled into a lathe and fractured. The employee was hospitalized.

A paint room operator's hand was caught in the exit conveyor of an automated paint booth, resulting in a left middle finger amputation.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.