Struck by falling object or equipment, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Austin Bridge & Road, LP, 3360 FM 2933, MCKINNEY, TEXAS 75071
on — Fractures, affecting the lower leg(s).
Final narrative
An employee had been measuring a head gate. The slide gate was being hoisted out of an aeriation basin box when the edge of the slide gate caught on the metal grating at the top of the box. The grating became dislodged and fell, contacting the lower right leg of the employee. The fibula and tibia were fractured.
An employee was obtaining a lab sample of AC oil for an asphalt mix design when oil contacted his heat protection glove gauntlets. The employee removed the gloves when the oil contacted both his palms and six fingers, resulting in second-degree burns.
A crew stopped operations when rainfall started. The injured employee was putting away tools in the tool truck bed while a pickup truck was driving to the end of the location. When the pickup truck applied the brakes, the mud caused the vehicle to slide. The injured employee was caught between the rear bumper of the tool truck and the front bumper of the sliding pickup truck. The employee sustained fractures to their pelvis and femur.
The injured employee and a co-worker were removing the bolts supporting a section of formwork. As the injured employee went to access the top of the formwork, they fell through the formwork. The employee fell 20 feet to the ground and sustained broken vertebrae and multiple contusions.
An employee was removing asphalt from a buggy auger. The employee's right index finger was amputated in a shear point between the spinning auger and the machine's frame. The auger was not locked out at the time.
An employee was standing on a platform spraying a surfactant onto the bed of an asphalt truck. The truck pulled next to the platform, then veered right; the platform fell over and the employee broke his left leg.
An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.
An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.
An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.
More severe injuries in this industry (NAICS 237310)
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.