Compressed or pinched by shifting objects or equipment · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Hooper Corporation, 1979 Milky Way, VERONA, WISCONSIN 53593
on — Fractures, affecting the elbow(s).
Final narrative
An employee was welding two high-density polyethylene (HDPE) pipes together using a fusion machine. As the employee attempted to slip check the pipe, they noticed that the south pipe was slipping out of the fusion machine jaw. Hydraulic pressure was released to reposition the jaw clamp onto the south pipe and the fusion machine jaw clamp slipped off the south pipe. The employee's arm was pinned between the fusion machine and the parallel pipe in the ditch, resulting in a chipped elbow bone and a laceration.
An employee was climbing a utility pole to conduct maintenance work and made contact with the electrical line. The employee was hospitalized for electric shock with burns to his right hand and wrist. Personal protective equipment was not worn at the time.
An employee was trimming tree branches at a client property. The employee was climbing the tree when they fell 10 feet to the ground, suffering fractured vertebrae.
An employee was loading HVAC components onto the back of a flatbed truck using a forklift. The employee got onto the flatbed to adjust/position the pallet to make room for a second pallet. The materials on top of the pallet shifted and moved toward the employee. The employee then jumped off the flatbed to the pavement four feet below, resulting in a fractured left tibia.
On August 12, 2024, an employee was traveling in a boom lift through a substation when it contacted an angle iron brace. The employee's body was caught between the brace and the boom lift controls and they sustained a fractured jaw.
An employee was working on a 120-volt secondary line from the bucket of a line truck when they contacted the line and sustained an irregular heart rhythm.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 238220)
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.
An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.
While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.
An employee was assembling a baker type scaffold. He was beginning to transverse down the scaffold, approximately six feet off the ground, when the scaffold tipped over and he fell. The employee was hospitalized with a fractured femur.
An employee was trimming out sprinklers on the exterior of a building when he fell off an extension ladder. He landed on the ground and sustained fractures to his nose and arm.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.