Fall to lower level from collapsing structure or equipment less than 6 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Dickson Company, 1035 Trident Blvd, Building 6592, SILVERDALE, WASHINGTON 98315
on — Fractures , affecting the Lower leg(s).
Final narrative
An employee was standing on an 8-foot ladder about halfway up the rungs (approximately 5 feet off the floor) to reach the ductwork to make the cut with a reciprocating saw. The unit snapped off and swung down, striking the large HVAC unit mounted to the concrete slab and bouncing back into the employee s ladder. The employee jumped off the ladder and landed on both feet on the concrete floor, causing a fracture to the employee s lower left leg.
Hospitalized Lower leg(s) Portable ladders and stairs unspecified
An employee was descending a 10-foot A-frame ladder. The ladder came out from under the employee when he was about 5 to 6 feet above ground level. He fell, landed on the left side of his body, and sustained fractures to four ribs, his pelvis, and hip socket, and sustained injuries on the left side of his body. The employee was hospitalized.
An employee was handling a small platform ladder with three steps and two wheels in the front. The employee was found on the floor underneath the ladder. She was hospitalized with multiple fractures to the sacrum.
An employee was on a ladder four feet above the ground to install insulation. The ladder began to slide and the employee jumped to the shop floor, breaking his left tibia and fibula at the ankle. He was hospitalized, requiring surgery.
On July 21, 2025, an employee was working from a 10-foot step ladder while installing a 3-by-5-foot glass window pane on the outside of a new home under construction. The window fell from the frame and the employee went to catch it when the ladder slipped. The employee fell 5 feet to the ground and landed on small pieces of concrete left over from the foundation pour. The employee was hospitalized with a dislocated elbow and fractured wrist that required surgery.
More severe injuries in this industry (NAICS 238910)
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.
An employee was assisting the crew with patching and restoring a roadway after the installation of a sewer line. He was helping place and level the blacktop/backfill material over the trench area to bring the road surface back to proper grade. The employee was walking between a forward-moving dump truck and a dirt pile when his right foot was run over by the truck s wheel, causing him to fall. The employee sustained injury to his foot.
An employee was operating a skid steer with a bucket attachment at a demolition site. While driving it to the rear of the property to park it, the employee came into contact with a live electrical transformer unit that was located outside of the facility. The employee sustained electrical burns on his hands extending up to his elbows and a fractured ankle.
An employee was installing a door on a semi-trailer. They were using a forklift to lift the door to the height of the trailer when the door became jammed between the forklift mast and the hinge on the trailer. When the employee went to dislodge the door from the mast, the door fell and crushed their foot. Their big toe was amputated. The employee was hospitalized and their big toe was surgically reattached. The employee's foot and other toes also required surgery.
An employee was drilling a hole into the sealed hold of a vessel so a marine chemist could test its atmosphere. Upon drilling the hole, a gas that was under pressure was released and caught fire at the drill motor, where the employee was holding it. The employee was burned.
An employee was performing restoration activities outside a 45-gallon condensation tank of a boiler system. As they were performing post-maintenance activities after repairing one of the two discharge pumps, one of the discharge valves would not open. The employee closed the intake pump to cool off the system and open the discharge valve. Two employees opened the inlet valve to return the tank to service. After they cracked open the inlet valve, a side wall of the tank blew out, causing the injured employee to suffer steam burns to half their body.
An employee was testing and troubleshooting the gang cylinder valve located in the gang area of the sawmill. The employee's fingertip was amputated by the gang cylinder valve.
An employee was unlocking containers on deck. The employee was de-lashing while standing on the edge of the lid. The lashing bar he was holding came off the cone, causing him to turn 90 degrees and strike a railing behind him. The employee sustained four fractured ribs.
An employee parked a side-by-side on the fixed internal ramp aboard a cargo ship. They exited the side-by-side and went to inspect the cargo below. The side-by-side rolled toward the employee and struck them as they were walking toward the edge of the ramp. The employee was knocked off the ramp and landed on the lower deck approximately 8 feet below. The employee was hospitalized with a fractured shoulder.