Contact with hot objects or substances · Thermal burns second degree
At a glance
Federal OSHA recorded a severe workplace injury
at City Brewing Company, LLC, 925 South 3rd Street, LA CROSSE, WISCONSIN 54601
on — Thermal burns second degree, affecting the Multiple body parts n.e.c..
Final narrative
An employee was removing a section of pipe to access valves that needed to be replaced on a brewing machine when a valve was opened. This caused hot wort (220 degrees Fahrenheit) to splash on him at an unknown pressure. He sustained second degree burns to his chin, cheeks, forehead, the left side of his chest, left arm, left hand, and right hand.
Hospitalized Multiple body parts n.e.c. Water, liquids nonchemical
An employee was standing on top of a stack of pallets approximately 3 feet, 9 inches tall to adjust a conveyor near a palletizer. The employee lost his balance when coming down from the pallets and fell to the concrete floor below, resulting in a compound fracture to his left wrist.
Two employees were working on a labeler. The first employee was cleaning the fingers of the labeler, while the second was working on a sensor. When the second employee finished his work on the sensor, he closed a door on the machine, causing a rack to move forward and catch the first employee's left-hand middle finger. The first employee suffered an avulsion that required surgical amputation of the fingertip.
An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.
An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.
After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.
More severe injuries in this industry (NAICS 312120)
An employee was carrying a bucket of acid to his workstation for cleaning purposes. He slipped and fell, and the acid spilled into his eyes. He suffered eye injuries and was hospitalized.
Two maintenance workers were troubleshooting an actuator. They removed the end covers to check for air leakage around the piston head. When they connected an air hose to the side of the actuator and applied pressure, the piston head blew out of its housing. It struck one of the employees in the chest, causing the employee to fall to the ground. The employee suffered an abdomen contusion, resulting in a laceration to the liver, and was hospitalized.
On March 25, 2025, an employee was closing the hurricane-rated sliding door and pinched her right index finger between the door and the doorframe, resulting in a fingertip amputation.
An employee was troubleshooting a machine when he slipped and went to brace himself. His hand entered the machine and the blade contacted his finger, resulting in a fingertip amputation.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.