Contact with cold objects or substances · Other or multiple types of burns degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Eckert Mechanical Services Corporation, 11260 Rte 9W, Coxsackie, COXSACKIE, NEW YORK 12051
on — Other or multiple types of burns degree unspecified, affecting the Body systems and other part(s) of body.
Final narrative
An employee was replacing a valve on a cooling system when refrigerant gas was released, burning their left hand and lungs.
Hospitalized Body systems and other part(s) of body Refrigerant and cryogenic substances unspecified
A forklift operator was switching out a propane tank on his forklift when the tank leaked and sprayed his right hand, resulting in hospitalization due to liquid propane burns. PPE (gloves) were not worn at the time of the incident.
An employee was filling a motor fuel cylinder from a bobtail. When he opened the handle on the fill nozzle it popped off the filler valve and pushed him back into a rack where he struck his head on a cylinder cage. He sustained a laceration to the back left side of his head. While working to wrestle the hose to the ground, he sustained burns from liquid propane on the right side of his chest and right arm, and sustained minor burns on the left side.
An employee was changing out a propane cylinder on a powered industrial truck when liquid petroleum gas contacted his hands. The employee sustained second-degree burns to his hands.
A temporary employee was injured after working with dry ice while wearing the gloves that were not suited to the task. He was hospitalized on May 29, 2024, and had three fingertips amputated.
More severe injuries in this industry (NAICS 238220)
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.
An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.
While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.
An employee was assembling a baker type scaffold. He was beginning to transverse down the scaffold, approximately six feet off the ground, when the scaffold tipped over and he fell. The employee was hospitalized with a fractured femur.
An employee was trimming out sprinklers on the exterior of a building when he fell off an extension ladder. He landed on the ground and sustained fractures to his nose and arm.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.