Willacoochee Industrial Fabrics, Inc.

While shrink wrapping a roll of fabric on a re-roll machine, both of an employee's hands and arms were pulled into the machine resulting in bruising. The employee was hospitalized.

An employee was operating a baler. When he hit the hydraulic switch for compaction, the baler door was pushed open and hit his right ribcage, fracturing four ribs requiring hospitalization.

An employee was bitten by a spider while cleaning a piece of equipment.

Employees were securing the fuel line of an outboard motor in preparation for removing the motor from a small vessel located in the equipment yard. A gasoline-related fire occurred and one employee sustained burns to both hands and forearms.

Two employees were replacing cartridge filters at the recycle oil filter in a hydrocracking unit. While removing compression springs from the top of the filters located within the filter pot, vapors that had accumulated within the filter tubes ignited, causing a flash fire. Both employees suffered burns to multiple body parts and were hospitalized.

An employee was performing diagnostic work on a vehicle engine. As the employee was leaning over the front of the vehicle, the engine was activated. A fuel leak had produced fumes around the engine, and the ignition spark ignited them. The employee suffered second-degree burns to both hands, both biceps, and the upper chest area.

An employee was checking the fuel level of a ride-on sprayer. While refueling the sprayer, fuel ignited and the employee sustained burns to their jaw and right thumb.

Two employees were working in the kitchen area of a food trailer. There was a sudden burst of fire in the kitchen, and both employees were engulfed by deflagration of gas which oriented from a propane-powered griddle. They suffered first-, second- and third-degree burns to their head, face, arms, and legs.

An employee was beginning to wind fabric onto a wooden shell. His left arm was caught between the fabric and a nip point of the machine, and then pulled into the machine. He was hospitalized with bruising, contusions, and abrasions to his arm, head, and ribs. The machine was not guarded at the time.

An employee was using a screen printing press to print designs on T-shirts when he was struck by a moving part of the machine. The employee was hospitalized for stomach and back injuries.

An employee was working to unfold a crease at the end of fabric that was feeding into a set of nip rolls on a machine. The employee's right hand fingers were pulled into the nip roll injuring the index and middle fingers. The middle fingertip was amputated.

An employee was cleaning a pillow fiber filling machine when his right index finger was caught and amputated in the machine's drum.

While shrink wrapping a roll of fabric on a re-roll machine, both of an employee's hands and arms were pulled into the machine resulting in bruising. The employee was hospitalized.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.