Richards Logging LLC

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.

An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.

A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.

An employee was working with a group of tree trimmers to trim a tree that was approximately 66 feet high and 28 inches in diameter. When the tree fell, it struck the employee. He was hospitalized with multiple fractures to the left side of his body, including his head.

On July 18, 2025, at approximately 1:09 PM, an employee was moving a trailer-mounted de-limber. He set his ground saw on the de-limber trailer and then got off the loader and stood to the side of the ground saw. A grapple skidder was raising the trailer slightly so he could throw the chain under the trailer to secure the ground saw. He then turned around and the ground saw slid off the trailer and struck his back. The employee was hospitalized with four fractured vertebrae.

On June 23, 2025, an employee was assisting with a tire replacement. As the employee was returning with tools, two co-workers were positioning the tire on the hub. The tire released pressure, causing a piece of the split rim to strike the employee. They were hospitalized with a fractured left ankle and pelvis.

An employee was cutting a tree. As they were walking away, part of the tree broke off and struck the employee. The employee sustained five broken ribs and a punctured lung.

An employee was climbing down a tree after setting a rope to allow the tree to be removed. A knot at the end of his climbing system failed and he fell from the tree, landing about 35 feet below. He suffered fractures to the pelvis and spinal cord and was hospitalized.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.