105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

LOREN COOK COMPANY

Struck by running powered equipment n.e.c. · Injuries to internal organs, major blood vessels unspecified

Federal OSHA recorded a severe workplace injury at LOREN COOK COMPANY, 2015 E. DALE ST., SPRINGFIELD, MISSOURI 65803 on — Injuries to internal organs, major blood vessels unspecified , affecting the Internal neck structures.

An employee was using a manual spinning machine to cut out the center of an inlet. The cutter bar struck his neck and jaw, breaking the jaw and injuring an artery in his neck.

Hospitalized Internal neck structures Lathes

LOREN COOK COMPANY

An employee was loading a piece of round aluminum into a CNC auto-spinning machine. Their left thumb was crushed between the tail block, the aluminum part, and the mandrel. The distal tip of the thumb was amputated.

LOREN COOK COMPANY

An employee was seated at a press brake and was putting strips of steel (2-inches by 2-feet) into a brake press machine. The machine actuated and his right ring finger was crushed between the upper die and the steel material. The finger was amputated through the base of the nailbed.

LOREN COOK COMPANY

An employee was lifting a fan part with a jib crane to take it from vertical to horizontal. The part, a large hollow steel cylinder with a flange on each end, was attached with lifting lugs and two lifting straps on either side of it in and upside-down V coming down from the crane hook. As the part was rotated, the employee's right hand was caught between the flange and a lifting strap and two right-hand fingers were crushed. The employee suffered an amputation to the ring fingertip, as well as a laceration/crush injury to the middle finger.

Loren Cook Company

An employee was building a wooden crate around an industrial fan for shipment. The employee's material slipped and as he tried to catch a board a staple was shot into his right knee cap and femur. The staple need to be surgically removed.

View LOREN COOK COMPANY's full OSHA safety record →

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Burke Builders Inc

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

LMMM Houston #80, LTD.

An employee was using a meat saw to slice pork when the blade amputated their right little fingertip.

Electric Boat Corporation

An employee was struck by a plasma cutter and suffered a broken left tibia and fibula. The employee was hospitalized.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

LOREN COOK

An employee was at the brake press when the press was activated, causing the ram to move. Two fingertips on his right hand were crushed between the dies and partially amputated.

LOREN COOK COMPANY

An employee was loading a piece of round aluminum into a CNC auto-spinning machine. Their left thumb was crushed between the tail block, the aluminum part, and the mandrel. The distal tip of the thumb was amputated.

LOREN COOK COMPANY

An employee was seated at a press brake and was putting strips of steel (2-inches by 2-feet) into a brake press machine. The machine actuated and his right ring finger was crushed between the upper die and the steel material. The finger was amputated through the base of the nailbed.

MORRISON PRODUCTS, INC.

An employee was climbing a fence in pursuit of two people who had been trying to break into a facility. He fell from the fence, suffered a broken left leg, and was hospitalized.

AirPro Fan & Blower Company

An employee was balancing a fan wheel. As he tried to slow or stop the wheel, his right hand was pulled into a belt running on a shaft. His index fingertip was amputated.

WADDELL CONCRETE INC.

An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.

Dollar Tree

An employee was on a step ladder in a store aisle, making room on shelving for merchandise. She fell from the step ladder to the floor, suffering two fractures in her left leg. She was hospitalized, requiring surgery.

Corrigan Brothers Inc

An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.

Plumb Supply Company

An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.

JRI INDUSTRIES

An employee was manipulating dies on a brake press. The press caught and crushed the employee's right forearm, resulting in hospitalization.