Caught, entangled in running powered equipment normal operation · Nonfatal 'crushing' injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Madison Polymeric Engineering, Inc., 965 West Main Street, BRANFORD, CONNECTICUT 06405
on — Nonfatal 'crushing' injuries, affecting the Hand(s), finger(s) unspecified.
Final narrative
An employee was operating a 55-ton hydraulic press and loading foam products into the press. When the press cycled, their left hand was crushed in the press.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 326150)
On July 22, 2025, an employee was cutting/torching a large piece of metal when a piece of the material broke loose, struck him mid-stomach, and knocked him to the ground. The employee was hospitalized with an umbilical hernia and fractures to his right femur and left fibula.
An employee was feeding material through a pinch roller. There was a line break and the employee was working to clear out the line. The closed roll grabbed his glove and pulled his entire arm through the machine. The employee sustained compartment syndrome and a broken fingertip requiring hospitalization.
An employee hooked up two bundles of steel tubing to be lifted with an overhead crane. He stumbled while walking and operating the crane and his right hand contacted the crane's pulley mechanism. The upward motion of the crane caused the cable to pull his finger into the pulley. The employee's fingertip was partially amputated.
The employee was operating a peeler machine when his left hand got caught against the log that was being peeled. The employee was hospitalized with lacerations to the fingers on his left hand that required stitches.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.