Champion Home Builders, Inc.

At 7:30 a.m. on March 11, 2025, an employee was cutting angle iron pieces with a saw. When he went to stop the blade, it lacerated his right middle finger.

The injured employee was holding the rafters at the roof build table area while a co-worker attached them to the roof frame using a pneumatic nailer. A four-inch nail ricocheted and pierced the employee's left shoulder resulting in injury to an artery and the left lung.

An employee was using a miter saw to install molding during construction of a new mobile home and sustained severe lacerations to their right arm and hand.

An employee was bent over a window frame that was on the floor to staple wood to the frame. He tripped, and a staple was shot into his left knee.

An employee was standing on an A-frame ladder 3 to 4 feet above the ground, replacing the exterior siding of a home. The ladder tilted to one side, causing him to fall off. He suffered eight broken ribs and a collapsed lung.

An employee was pulling a steel parts handcart when its wheels caught on something and locked up. The cart fell backward. The cart handle struck the middle of the employee's right foot, breaking bones. The employee was hospitalized and required surgery.

An employee was manually moving a tall cart filled with pints of ice cream within the facility. While transferring the cart toward the exterior of the receiving area, the cart passed over a floor drainage grate, became unstable, and fell toward the employee, pinning him underneath. The cart and its contents landed on his lower right leg, resulting in multiple fractures.

An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.

An employee was moving a ramming machine to a staging area. While using the controls on the side of the machine, there was a sudden heavy rainfall causing the equipment to slide. The ramming machine tipped over and caught the employee against the ground. The employee sustained a fracture to the right side of their pelvis and was hospitalized.

An employee was transporting a cart containing instruments and packs to the operating room. The cart tipped over and fell on top of the employee. They sustained pain in their lower back and radiculopathy in their lower extremities.

On September 5, 2025, an employee was installing gang plates on a structure when the side walls fell and hit her head. She then fell onto her back and the side wall pressed her to the ground, resulting in hospitalization due to an ilium fracture and a transverse process fracture on the right side.

An employee was blowing cellulose insulation into the open attic area of a manufactured home. While the employee was holding the insulation hose, it caught on the guardrail of the catwalk/suspended walkway leading into the attic. The tugging motion caused the employee to lose their footing and step onto the sheetrock ceiling. The employee fell through the ceiling to the ground about 8 feet below and suffered a broken lower left leg. The employee was hospitalized.

An employee was going between a ladder and a wall to repair a wall in the utility room. A brad-nailing gun was hanging on a piece of wood on the side of the ladder. The employee contacted the brad nailer and the trigger was pushed into the wooden piece. The brad-nailing gun actuated and shot a 2-inch brad into the employee's abdomen.

An employee was on a scaffold caulking and painting a manufactured home. She fell off the scaffold an estimated 6 to 8 feet, landing on the concrete floor. The employee suffered upper body injuries and was hospitalized.

An employee was going up a ladder from the first level roof to the second level roof. The ladder slipped and the employee fell approximately 8 to 10 feet to the surface on the first level. The employee sustained fractures to three ribs and bruises on their arms and hands.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.