SSA Atlantic, LLC

Four employees were rigging a truck to be lifted off a ship by a crane. The crane began lifting the truck, causing it to move and knock one of the employees into a nearby shipping container. He suffered multiple injuries to the upper torso.

An employee was scanning barcodes on vehicles and going through the manifest as a checker. They went to the rear of a vehicle to scan a barcode when the vehicle behind them rolled forward into them. The employee was punctured by a removeable latching pin on the front of the vehicle and sustained a laceration above the knee. They were hospitalized.

On September 8, 2022, an employee was descending the ladder of a cargo ship when he fell approximately 4 feet to the deck below. The employee was hospitalized with a neck fracture, head laceration, and bruises on his right leg.

An employee was standing next to a jockey truck. A pickup truck crossed a marked RTG lane and struck the employee, who suffered a fractured skull, broken vertebrae in the back, and a dislocated left shoulder.

A truck driver had parked a truck, carrying a container, under a crane. The crane picked up the trailer and took the truck with it, lifting the truck about 10 feet. When the crane lowered the truck, equipment inside the cabin injured the employee's neck, lower back, and right arm. The employee was hospitalized.

An employee was painting a round module when a front-end loader ran over his right leg and crushed it.

An employee was operating a switch truck at a rail yard. He got out of the switch truck to unlock a container that was attached to a unit in front of him. The switch truck rolled and pinned the employee against the container. The employee sustained a fractured pelvis, a ruptured spleen, and a possible spinal cord injury.

On October 16, 2025, an employee was entering a parking lot after completing their work shift when they were struck by a vehicle being operated by a customer. The employee fell backward from the impact and the back of their head struck the asphalt. The employee was hospitalized due to brain bleed and a skull fracture.

An employee was moving branches and other material when they were struck in the leg by the track of a skid-steer loader, resulting in an ankle and lower leg injury.

An employee was waiting for an operator to bring mail over to a mail sorting machine when she became pinned between the machine and a stack of pallets being pushed by a powered industrial truck (PIT). The employee suffered bruising and swelling on her hips, lower back, knees, and left side; a puncture wound to her left thigh from a machine screw; a crushed right hand with numbness and tingling; numbness to the left big toe; and a right wrist sprain.

While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.

An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.

The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.

An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.

An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.