SRS Building Products

An employee was accessing the bed of a delivery truck using a ladder mounted to the side of the truck. He lost his footing, fell, and struck his head on the bed of the truck. The employee sustained a fractured skull. It was raining at the time of the incident.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

An employee was helping to install a tarp on a roof when they fell through a skylight to the ground below, resulting in fractures to their face and ribs.

On August 5, 2025, an employee was exiting a room when his left middle and ring fingers became caught in the door as it shut. The middle fingertip was amputated.

An employee was driving a forklift and unloading racks of glass from a truck. A rack began to tilt; the employee exited the forklift and went to stabilize it. The rack tipped and pinned his left arm against the forklift. The forearm was broken and required surgery.

An employee was sitting on a stack of steel beams. When they stood up, the top beam fell onto the employee, resulting in a broken left leg.

An employee was working to tow a forklift with another forklift when the tow line came loose and struck their face. The employee sustained head, face, and eye injuries.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.