Struck by running powered equipment unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Lion Elastomers LLP, 1615 Main St., PORT NECHES, TEXAS 77651
on — Fractures , affecting the Leg(s) unspecified.
Final narrative
Two employees locked out/tagged out a screw for digging out rubber, which caused the paddle screw to get stuck. They removed the rubber from the paddle screw, removed the lock out/tag out, and restarted the machine. When it restarted, the injured employee's right leg became entangled in the paddle screw, resulting in a fractured leg.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
More severe injuries in this industry (NAICS 325212)
On July 16, 2025, at around 2:20 PM, an employee was drilling a hole in a metal bracket. One end of the bracket was secured in a vise. When drilling, the bracket twisted and wrapped around the employee's left index finger. The employee's fingertip was amputated near the top joint.
An employee was manually lifting a 2-inch roll of paper weighing 58 pounds onto the line when they suffered a lower back injury. The employee was hospitalized.
On April 14, 2025, an employee was adding material into a mixer for rubber manufacturing. The employee was removing a piece of rubber under the door of the machine when the machine was started. The employee's left hand was shut in the door and they were hospitalized with a fractured hand. The machine was not locked out/tagged out at the time.
An employee was driving a forklift after putting trash into the trash compactor. The forks of the lift struck uneven asphalt on the road, causing the forklift to abruptly stop. The employee bounced up and struck his head on the forklift cage, resulting in a skull fracture.
A loaded sulfuric acid railcar was being pressured up for shipment when a 2-inch cap on the induction tube on top of the railcar failed. Sulfuric acid sprayed out of the induction tube and was released into secondary containment; a portion of the released liquid contacted an employee working on top of the railcar/on the loading rack. The employee was hospitalized for exposure to sulfuric acid (93%) on the face, upper torso, and bilateral upper extremities including the hands.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.