Collision with stationary object, nonroadway · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at KMC Acquisition LLC, 1451 S. Carlos Avenue Ontario, ATHENS, GEORGIA 30601
on — Fractures , affecting the Skull.
Final narrative
An employee was driving a forklift after putting trash into the trash compactor. The forks of the lift struck uneven asphalt on the road, causing the forklift to abruptly stop. The employee bounced up and struck his head on the forklift cage, resulting in a skull fracture.
Hospitalized Skull Forklift, order picker, platform truck powered
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was operating a stand-up forklift. The forklift drove into a rack in a warehouse, and the employee's right hand was caught between the rack and an upright supporting the forklift's overhead guard. The employee suffered a fracture and laceration to the hand, just below the little finger.
More severe injuries in this industry (NAICS 325212)
On July 16, 2025, at around 2:20 PM, an employee was drilling a hole in a metal bracket. One end of the bracket was secured in a vise. When drilling, the bracket twisted and wrapped around the employee's left index finger. The employee's fingertip was amputated near the top joint.
An employee was manually lifting a 2-inch roll of paper weighing 58 pounds onto the line when they suffered a lower back injury. The employee was hospitalized.
On April 14, 2025, an employee was adding material into a mixer for rubber manufacturing. The employee was removing a piece of rubber under the door of the machine when the machine was started. The employee's left hand was shut in the door and they were hospitalized with a fractured hand. The machine was not locked out/tagged out at the time.
Two employees locked out/tagged out a screw for digging out rubber, which caused the paddle screw to get stuck. They removed the rubber from the paddle screw, removed the lock out/tag out, and restarted the machine. When it restarted, the injured employee's right leg became entangled in the paddle screw, resulting in a fractured leg.
A loaded sulfuric acid railcar was being pressured up for shipment when a 2-inch cap on the induction tube on top of the railcar failed. Sulfuric acid sprayed out of the induction tube and was released into secondary containment; a portion of the released liquid contacted an employee working on top of the railcar/on the loading rack. The employee was hospitalized for exposure to sulfuric acid (93%) on the face, upper torso, and bilateral upper extremities including the hands.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.