Struck by other falling object n.e.c. · Cerebral and other intracranial hemorrhages without skull fracture
At a glance
Federal OSHA recorded a severe workplace injury
at Haven Steel Products Inc, 13206 S. Willison Rd., HAVEN, KANSAS 67543
on — Cerebral and other intracranial hemorrhages without skull fracture , affecting the Brain.
Final narrative
An employee was working at a quench conveyor belt, pulling steel blades off the belt and placing them on the low heat belt. One of the blades fell off the quench belt onto the floor. The employee bent over to pick the blade up off the floor when another blade fell off the quench belt and struck them on the top of their head. The employee was hospitalized with a brain bleed.
Hospitalized Brain Metal building materials unspecified form
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
An employee was operating a 32-ton mechanical power press performing a presetting function when a finger on his left hand was caught in the press and the fingertip was amputated.
An employee was charging a gas spring to pressure when the gas spring blew apart, injuring his right hand, left hand, and abdomen. The employee suffered the amputation of three fingers on his right hand and was hospitalized.
An employee was conducting a measurement setup on a parabolic eye forming apparatus. During the setup process, the forming assembly cycled and the employee's left index finger was crushed between the forming assembly and the die block. The employee sustained a laceration and fracture to the left index finger that resulted in medical amputation of the fingertip.
Two employees were performing a changeover of steel rolls/tooling. While one employee was pushing a metal roll stand back onto a shaft, the injured employee's left middle finger was caught between the metal spacer and the key-way of the metal stand. The fingertip was amputated.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.