Struck by rolling, sliding, or shifting objects non-running · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at DolGenCorp, LLC, 9135 Highway 31, LONOKE, ARKANSAS 72086
on — Fractures , affecting the Leg(s) unspecified.
Final narrative
On October 9, 2024, an employee was observing a weekly store delivery. While the liftgate was on the ground, a rolling container carrying refrigerated product rolled off. When the employee stopped the rolling container, it fell onto her left leg. She was hospitalized with a left leg fracture.
Hospitalized Leg(s) unspecified Utility carts, hand trucks, dollies
An employee was hooking up the lines from a trailer to a yard truck when she lost her footing and fell onto her right side on the ground. The employee was hospitalized with an injury to her right hip.
At about 3:40 a.m. on August 13, 2025, an employee was filling orders in an aisle. She was pulling over her material handling equipment to allow another employee to get around her when the equipment struck a rack. She suffered a laceration to the left leg/knee area.
An employee was operating a rolling container carrier (RTC) vehicle in pedestrian mode. When he operated the hand lever to turn it, the RTC pinned his left leg against the pick location. The employee suffered a laceration on his left knee and was hospitalized.
An employee was unloading freight from a semi-truck trailer when their foot was caught on the liftgate, resulting in a partial amputation of their left big toe.
An employee was returning from lunch while another employee was moving a powered rolltainer carrier from its parking spot, when the carrier went forward and struck the injured employee on her left leg, resulting in a laceration requiring surgery.
An employee was using his left hand to push an axle down the line on a raised track work area while holding the remaining axle back with his right hand. A finger on his right hand was caught between the rail and the dust guard of the axle, resulting in a fracture and a laceration.
An employee was moving metal out of a cart. He had removed one piece and was working to move another when the metal shifted. His right ring finger was crushed between the two pieces, and he suffered a partial amputation to the finger pad at the tip.
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 453998)
An employee was walking to take their break. As they walked from their locker to the entrance of the break lounge, they tripped over a pallet and fell to the ground, resulting in hospitalization due to a concussion.
An employee was working at a processing table and pivoted to place merchandise on a shelf. She tripped on the leg of the table and sustained fractures in her foot.
An employee was working to fix the forks on a forklift when the fork(s) fell on her toes. The second and third toes on her right foot were fractured, lacerated, and required stitches.
An employee was involved in a physical altercation with two temporary employees. The employee was hospitalized with facial injuries and required surgery.
An employee went to lift a carton and tripped on a different carton that was on the floor. She fell on the floor in the backroom and sustained a fractured right hip, and abrasions to her arm and knee. The employee was hospitalized and required surgery.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.