IXONIA, WISCONSIN—
G & V Machine Co., Inc.
Pedestrian struck by vehicle in nonroadway area unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at G & V Machine Co., Inc., N8100 Industrial Drive, IXONIA, WISCONSIN 53036 on — Fractures , affecting the Foot (feet), toe(s) unspecified.
Final narrative
On October 14, 2024, at 3:00 a.m., an employee was walking in the shop when they were struck and run over by a forklift. The employee sustained eight fractures to their right foot, as well as lacerations, soft tissue damage, and fractures to their left foot.
More severe injuries at G & V Machine Co., Inc.
IXONIA, WISCONSIN—
G & V Machine Co., Inc.
An employee was cutting 14-inch bar stock on a large horizontal band saw. The saw caused amputations to the employee's right index and middle fingers.
View G & V Machine Co., Inc.'s full OSHA safety record →
Similar incidents · Same event type
TAHOKA, TEXAS—
New Home Co-Op
An employee was painting a round module when a front-end loader ran over his right leg and crushed it.
JACKSONVILLE, FLORIDA—
Parsec LLC
An employee was operating a switch truck at a rail yard. He got out of the switch truck to unlock a container that was attached to a unit in front of him. The switch truck rolled and pinned the employee against the container. The employee sustained a fractured pelvis, a ruptured spleen, and a possible spinal cord injury.
ROUND ROCK, TEXAS—
Lowe's Home Improvement LLC
On October 16, 2025, an employee was entering a parking lot after completing their work shift when they were struck by a vehicle being operated by a customer. The employee fell backward from the impact and the back of their head struck the asphalt. The employee was hospitalized due to brain bleed and a skull fracture.
PEORIA, ILLINOIS—
JIMAX Landscape LLC
An employee was moving branches and other material when they were struck in the leg by the track of a skid-steer loader, resulting in an ankle and lower leg injury.
AURORA, ILLINOIS—
United States Postal Services
An employee was waiting for an operator to bring mail over to a mail sorting machine when she became pinned between the machine and a stack of pallets being pushed by a powered industrial truck (PIT). The employee suffered bruising and swelling on her hips, lower back, knees, and left side; a puncture wound to her left thigh from a machine screw; a crushed right hand with numbness and tingling; numbness to the left big toe; and a right wrist sprain.
More severe injuries in this industry (NAICS 332710)
DEER PARK, TEXAS—
UPS Industrial Services, LLC
An employee was positioning dunnage on a trailer while pipe was unloaded from a forklift. A pipe fell and the employee's right thumb and index finger were caught between the pipe and a piece of dunnage. The thumb was crushed, and the index fingertip was amputated.
BETHLEHEM, PENNSYLVANIA—
Phoenix Tube Company, Inc.
An employee was using a lifting sling on a crane to move a straight-bar bundle and place it on top of an existing bundle. When moving the lifting sling, it became pinched between the bundle and a wood cleat. The bundle then fell onto the employee's left foot, resulting in crush injuries.
FORT SMITH, ARKANSAS—
Kopco, Inc
An employee was stacking metal tubes using a forklift. A stack became unstable and the employee got out of the forklift to steady it, instructing his helper to get into the forklift. The forklift movement caused some tubes to fall and strike the employee, resulting in an open fracture of his left hand.
CORDOVA, ALABAMA—
Wilson Machine & Welding, Inc.
An employee was setting up a flexible gear coupling hub in a lathe, preparing to bore it out to fit a shaft. The hub assembly was not secured in the chuck when the crane support was removed, and the employee's right little finger was caught between the hub assembly and the inside of the lathe. The fingertip was amputated.
CLEWISTON, FLORIDA—
D & J MACHINERY, INC.
An employee was using a crowbar to loosen a flat bar when the crowbar struck the employee's right eye. The employee was hospitalized and required surgery.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.