105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

NuCera Solutions

Contact with hot objects or substances · Thermal burns degree unspecified

Federal OSHA recorded a severe workplace injury at NuCera Solutions, 601 5th Street, BARNSDALL, OKLAHOMA 74002 on — Thermal burns degree unspecified, affecting the Forearm(s).

Watch NuCera Solutions — free Get an email when a new federal OSHA severe-injury report for NuCera Solutions is published. One employer, no account, unsubscribe in one click.

An employee was cleaning the head of a hot roller when their glove got caught in the roller, pulling their arm into it and resulting in burns to their forearm.

Hospitalized Forearm(s) Machinery unspecified

NuCera Solutions

An employee was sprayed with hot water when a nearby bleeder valve was under pressure that caused the valve to release. This resulted in burns to their legs and lower torso.

View NuCera Solutions's full OSHA safety record →

Spudrock LLC

An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.

Ajinomoto Health and Nutrition North America Inc.

An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.

APAC-Alabama, Inc.

After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.

Cellar Crew LLC

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

Boise Cascade Wood Products, LLC

An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.

poet bio refining of macon

An employee was ascending an 8-foot aluminum extension ladder to access and replace a hypochlorite pump located on top of a 7-foot chemical tank. When he reached approximately 5 feet on the ladder, the ladder shifted and twisted to the right. The employee fell from the ladder and landed on his right side. The employee sustained a compound fracture to his right leg just above the ankle, dislocation of his shoulder, and a torn rotator cuff. The employee was hospitalized.

Phillips 66 Company dba Phillips 66 Refinery Wood River

An employee was taking a butane gas sample as part of the hydrocarbon refining process. A component disconnected and the butane ignited, resulting in first- and second-degree burns to the employee's forearms and to their face, including their cheeks, chin, and neck.

CITGO Petroleum Corp Lemont Refinery

An employee was driving a carry deck/small crane when its boom made contact with an overhead support beam. The employee was jostled in the cab and suffered a concussion.

NuGen Energy, LLC

An employee was inventorying hammer mill screens when the screens fell on the employee. The employee sustained a laceration to their leg requiring hospitalization.

Bechtel Energy Headquarters

An ironworker was maneuvering a mobile elevated work platform (MEWP) into position to install a structural beam. The employee was pinned between another structural steel beam that was already installed and the MEWP control box cover. The employee was hospitalized with a laceration to their lip, dislodged teeth, and a fractured jaw.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.