105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

L3Harris Technologies, Inc.

Struck by other falling object n.e.c. · Fractures

Federal OSHA recorded a severe workplace injury at L3Harris Technologies, Inc., 77 River Road, CLIFTON, NEW JERSEY 07014 on — Fractures , affecting the Trunk and hip joint(s).

An employee was moving a large safe weighing approximately 625 lbs. with a dolly that was specially-designed to move the safe. The safe fell from the dolly, struck the ground, fell forward onto the employee, striking their right hip/pelvis area before rolling off the employee onto the floor. The employee sustained a right hip/pelvic fracture.

Hospitalized Trunk and hip joint(s) Cabinets, cases, dressers

L3Harris Technologies, Inc.

An employee was washing an aircraft from a scissor lift when they fell to the floor. The employee sustained a back injury and lacerations to their head and neck.

L3Harris Technologies, Inc.

An employee was leaving a meeting at a customer site. As they were descending an interior staircase, the employee lost their footing on the last step and fell forward, landing on both knees on the concrete floor. The employee sustained a bilateral patellar tendon tear.

View L3Harris Technologies, Inc.'s full OSHA safety record →

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Red Dot Corporation

An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.

Simon Contractors of South Dakota, Inc.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

RJV Construction

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

Toledo Commutator Company

An employee was operating a mica disc punch press. While the employee was working to clear material from the press, it cycled and amputated the tips of their left thumb and index finger. The press was guarded at the time of the incident.

Electro Switch

An employee was repositioning a wire that would not advance in a crimping machine when the machine closed on her right index finger. The employee sustained a fingertip amputation.

Schleuniger, Inc.

An employee was repairing a benchtop wire processing machine that is used to make wire harnesses for commercial applications. A guard had been removed in order to access the components. The employee was testing the "trigger" sensor of the machine and adjusting the blades when the machine actuated and a blade amputated part of his left index fingertip.

Wolfspeed, Inc.

An employee was checking the industrial waste stream as it discharged into a 4,000-gallon waste collection tank. The employee's right wrist was splashed with corrosive chemicals, resulting in hospitalization for a chemical burn.

Fisher Rosemount Systems Inc.

An employee was taking inventory of metal plate parts in a cardboard box when a part dropped, smashing her left middle finger between parts. One centimeter of the employee's left middle finger was amputated.

JERSEY CITY MEDICAL CENTER

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

APM TERMINALS PORT ELIZABETH

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

Allied Waste Systems Inc

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

Fitness International, LLC

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

Bristol Myers Squibb

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.