105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

KC Electric Group LLC

Fall to lower level resulting from exposure or contact less than 6 feet · Traumatic injuries or exposures unspecified

Federal OSHA recorded a severe workplace injury at KC Electric Group LLC, 8775 W 95th Street, OVERLAND PARK, KANSAS 66212 on — Traumatic injuries or exposures unspecified, affecting the Head unspecified.

An employee was moving a ceiling tile to install a new cable above a ceiling when they contacted a 120-volt electrical current. They fell four feet from a ladder to the floor, striking their head. The employee sustained a head injury.

Hospitalized Head unspecified Portable ladders and stairs unspecified

The Home Depot USA, Inc.

An employee was unloading freight from a truck when a stack of doors fell over and knocked the employee to the ground. The employee sustained a fractured femur.

Longroad Energy

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.

Stallion Oilfield Construction, LLC

An employee was removing a hot water heater (that was full of water) from a trailer. The glove on his left hand was caught on the pipes of the moving water heater, causing him to lose balance and fall approximately 4 feet from a ladder to the ground below. The employee's lower left leg and hip were fractured.

Cutco Corp.

Employees were upgrading lighting fixtures in the accounting offices. The injured employee was on a ladder working on a ceiling light fixture. He came into contact with the metal grating surrounding the fixture and sustained an electrical shock that caused him to lose balance and fall approximately 3 to 4 feet to the floor. The injured employee sustained a fractured pelvis and a torn rotator cuff.

Electrical Specialists, Inc.

An employee was working in an electrical junction box and was shocked by an energized circuit. The employee fell off a ladder about 3-4 feet to a cement floor, sustaining fractures to his left shoulder and right heel. The employee was hospitalized.

Smart Building Technologies - A Fidelity Company

An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.

Abbott Electric Inc

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

Mintcrest Corp

An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.

Cupertino Electric, Inc.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

Swedberg Electric, LLC

The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.

Omya Inc.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

John Deere Coffeyville Works

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

Haven Steel Products Inc

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Vestas-American Wind Tech

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

Alliance Ag and Grain LLC

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.