Verner-Cadby, Inc

An employee fell onto pavement while loading parts into a van for delivery.

An employee was diagnosing the cause of a rear light malfunction on a forklift when the reverse gear engaged. The forklift moved backward and contacted the employee causing a metatarsal fracture in their left foot and injury to their lower right leg.

An employee was collecting shopping carts in the parking lot when he was struck by a customer's truck as it was backing out of a parking spot. The truck pinned the employee's left leg against the cart mule they were using. The employee was hospitalized with a fractured leg and required surgery.

An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.

An employee took a picture of the seal and license plate on a delivery truck after loading. The truck then reversed back to the dock and pinned the injured employee against the dock. The employee sustained an abdominal fracture.

An employee was between a milling machine and an 18-wheeler belly dump when the 18-wheeler backed up and ran over his feet and legs. The employee was caught between the front of the milling machine and the truck. The employee sustained fractures to their hip, leg, and feet.

An employee was on a 20-foot ladder cleaning tile on the side of a building. The ladder slipped and he fell to the ground. He landed on his feet, resulting in hospitalization with fractures to both feet.

An employee was putting away stock in the aisles and began driving his order picker down the aisle with a pallet of items loaded on the forks. The pallet struck an upright of the warehouse racking and was pushed toward the employee, causing him to fall. The front edge of the pallet drove his right leg into the front panel of the order picker, fracturing his right leg above the ankle.

An employee was completing an inspection on a truck when the flywheel amputated their fingertip.

The injured employee was vacuuming out the trunk of a parked vehicle. Another employee was operating a vehicle when the brakes failed and the vehicle struck the back of the injured employee's legs pushing him into the vehicle he was vacuuming. The employee sustained a fractured leg.

An employee got out of his truck and closed the door when his right hand got caught in the door, resulting in a broken ring finger and an amputation of the middle fingertip that required hospitalization.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.