Pedestrian struck by vehicle in nonroadway area unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Smithfield Packaged Meats Corp., 1400 North Weber Avenue, SIOUX FALLS, SOUTH DAKOTA 57103
on — Fractures , affecting the Ankle(s) and leg(s) n.e.c..
Final narrative
An employee was retrieving empty boxes from a storage area while a pallet jack was loading a tote onto a tote scale. The pallet jack pinched the employee's leg between the tote and an angle iron mounted to the floor. The employee sustained a fractured tibia and ankle.
Hospitalized Ankle(s) and leg(s) n.e.c. Pallet jack riding
More severe injuries at Smithfield Packaged Meats Corp.
An employee was standing near a doorway, helping pass a flexible hose through a window when the door closed on his right middle finger. He suffered a non-displaced fracture to the last joint of the finger and a partial amputation through the distal phalanx.
An employee was operating a hot dog peeler. They went to remove a casing and their left middle finger struck the wheels of the peel, resulting in a fracture and avulsion that required medical amputation of the fingertip.
An employee was attempting to start a stomach washer. When it would not start, he attempted to rotate the tub when it caught his little finger, resulting in a fingertip amputation.
An employee was operating a rider-style powered pallet jack. He lost his balance causing him to fall off and become trapped between it and a wall. He suffered a broken pelvis and was hospitalized.
An employee was operating a switch truck at a rail yard. He got out of the switch truck to unlock a container that was attached to a unit in front of him. The switch truck rolled and pinned the employee against the container. The employee sustained a fractured pelvis, a ruptured spleen, and a possible spinal cord injury.
On October 16, 2025, an employee was entering a parking lot after completing their work shift when they were struck by a vehicle being operated by a customer. The employee fell backward from the impact and the back of their head struck the asphalt. The employee was hospitalized due to brain bleed and a skull fracture.
An employee was moving branches and other material when they were struck in the leg by the track of a skid-steer loader, resulting in an ankle and lower leg injury.
An employee was waiting for an operator to bring mail over to a mail sorting machine when she became pinned between the machine and a stack of pallets being pushed by a powered industrial truck (PIT). The employee suffered bruising and swelling on her hips, lower back, knees, and left side; a puncture wound to her left thigh from a machine screw; a crushed right hand with numbness and tingling; numbness to the left big toe; and a right wrist sprain.
More severe injuries in this industry (NAICS 311611)
An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.
An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.
An employee was using a hook tool to pull a pallet onto the lift gate of a tractor trailer. The hook detached from the underside of the pallet, causing the employee to fall backward off the lift gate. The employee landed on the concrete parking lot about 5 feet below, suffering fractures to the skull and two thoracic vertebrae.
An employee was walking on a truss table when he lost his balance and fell approximately 3 feet to the floor. The employee sustained a dislocated and fractured left ankle.