Other fall to lower level 6 to 30 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Univar Solutions, 156 W 56th Ave, DENVER, COLORADO 80216
on — Fractures , affecting the Trunk and other lower extremities.
Final narrative
The injured employee was on top of a rail car after completing a chemical transfer. After removing the stinger (25' measuring pole), he stepped onto the barrel of the rail car, and went to hand the stinger to a co-worker who was on a rail car on a separate track. The injured employee lost his balance and fell forward through the cage on top of the rail car. He struck the side of the adjacent rail car and landing on the ground. The fall distance was approximately 15 feet. The employee sustained a compression fracture in his spine and fractures to both heels.
Hospitalized Trunk and other lower extremities Heavy rail vehicles unspecified
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was standing on the surface of a steel beam about two feet wide. He slipped and fell backward, landing on the concrete ground about 20 feet below. The employee sustained a broken pelvis.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
An employee was working on a platform, raised 6 to 8 feet in the air, to get something off a rack. The employee fell from the platform to the ground and sustained a head injury and injury to multiple body parts.
An employee was preparing to unjam an auger shaft while standing on a forklift-elevated, job-made platform. The employee's wrench slipped off the equipment, causing them to lose their balance and fall. The employee landed on the ground 14 feet below and suffered fractures to the orbital bone, left elbow, and lower back.
More severe injuries in this industry (NAICS 424690)
An employee was servicing a bypass feeder system. The system released hot water onto the employee, resulting in first- and second-degree burns to his face, chest, right arm, and both hands.
An employee was cleaning a formic acid hose with water when formic acid splashed his right shoulder, both arms, and his face under his face shield. He was hospitalized.
A driver had just climbed out of a truck. He stepped back to close the door and his foot went into a low spot on the ground. He fell backward onto an incline, rolled, and suffered a compound fracture to the wrist. He was hospitalized, requiring surgery.
An employee was walking between two tanks when he stepped into a sump pit that was missing its metal grate. His leg was submerged in sulfuric acid, and he suffered chemical burns to the lower part of his right foot. The employee was hospitalized.
An employee was delivering pool chemicals from a tanker truck when the pipe connection broke. The employee sustained chemical burns from the sodium hypochlorite.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.