MARMADUKE, ARKANSAS—
Greenbrier Companies, Inc.
Struck by other falling object n.e.c. · Fractures and surface, flesh wounds
At a glance
Federal OSHA recorded a severe workplace injury at Greenbrier Companies, Inc., 7755 Highway 34 East, MARMADUKE, ARKANSAS 72443 on — Fractures and surface, flesh wounds , affecting the Lower leg(s).
Final narrative
An employee was working to remove a railcar coupler (approximately 400 pounds) from a rail tanker car prior to abrasive blasting. A forklift was used to hold the weight. While attaching a device to the coupler, the last pin holding the coupler was removed. The coupler fell onto the employee's lower right leg, causing a hairline fracture and an open wound that was approximately 1x3 inches in size.
More severe injuries at Greenbrier Companies, Inc.
MARMADUKE, ARKANSAS—
Greenbrier Companies, Inc.
An employee was working the hand brake to stop a railcar. The hand brake jammed causing the railcar to bump into a shop truck that was on the same line. The employee's right hand got caught between the railcar and the shop truck, causing the amputation of the index finger, middle finger, and thumb.
MARMADUKE, ARKANSAS—
Greenbrier Companies, Inc.
An employee was inspecting the inside of a new tank car. He attempted to maneuver around another employee inside the tank car when he slipped and fell, suffering a femoral neck fracture.
MARMADUKE, ARKANSAS—
Greenbrier Companies, Inc.
An employee was walking by a rack when she tripped on a handrail that was in the rack and fell to the floor. She suffered a broken left femur.
View Greenbrier Companies, Inc.'s full OSHA safety record →
Similar incidents · Same event type
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
ATHENS, TEXAS—
Red Dot Corporation
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
RAPID CITY, SOUTH DAKOTA—
Simon Contractors of South Dakota, Inc.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
SOUTH BOSTON, MASSACHUSETTS—
RJV Construction
An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.
More severe injuries in this industry (NAICS 336510)
ERIE, PENNSYLVANIA—
Wabtec US Rail, Inc.
An employee was responding to a service request for a cable stripping machine that was making noise and not functioning consistently. While testing its function, the machine contacted the employee s right index fingertip, resulting in a fingertip amputation to the tuft.
LINCOLN, NEBRASKA—
Kawasaki Motors Manufacturing Corporation, U.S.A.
An employee was using a handheld cordless electric torque wrench. The tool's reaction arm came into contact with the employee's left hand, causing an amputation to the middle finger above the first knuckle.
PARAGOULD, ARKANSAS—
Greenbrier Central Paragould
On August 6, 2025, an employee was preparing to weld a metal sheet that goes between containers and weighs 800 pounds. The employee was placing a two-foot wooden brace (4 by 4) under the metal, which was being raised by a crane operator using a magnet. The magnet shifted and caused the load to catch the employee's right index fingertip against the wooden brace, resulting in a fingertip amputation.
HOCKLEY, TEXAS—
GBW Railcar Services, L.L.C.
An employee was climbing up a ladder to the top of a railcar. The employee slipped and fell from the ladder, striking the coupler of the railcar during the fall. This caused the employee's body to shift, and they landed on their head/nose/face. The employee suffered broken ribs, a broken cheekbone, a broken nose, and internal bleeding.
TEXARKANA, TEXAS—
Texana Tank Car
An employee was climbing up a fixed ladder on a tank car. The employee fell from the ladder to the ground, 8 to 10 feet below, and broke both ankles.
More severe injuries in ARKANSAS
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
TEXARKANA, ARKANSAS—
The Goodyear Tire & Rubber Company
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PINE BLUFF, ARKANSAS—
American Tile & Marble Co., Inc
An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.
SCRANTON, ARKANSAS—
Johnson Industrial Coatings, LLC.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.