Struck by running powered equipment during maintenance, cleaning, testing · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at Wabtec US Rail, Inc., 2901 East Lake Road, ERIE, PENNSYLVANIA 16531
on — Amputations involving bone loss, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was responding to a service request for a cable stripping machine that was making noise and not functioning consistently. While testing its function, the machine contacted the employee s right index fingertip, resulting in a fingertip amputation to the tuft.
Amputation Finger or thumb tip(s), nail(s) Other metal, wood, and special material machinery n.e.c.
An employee was stepping backward off a paint skid to the floor 9 inches below. His left leg gave out and he fell to the floor coming down on his left knee. He suffered a broken left femur.
An employee was working on a jacket line for power assemblies for engines when a slide stop would not retract. The injured employee and maintenance employees worked together to troubleshoot the issue. The injured employee was checking an air pressure switch on the machine when the hydraulic cylinder extended and crushed their right index finger against the jacket line, amputating the finger to the first knuckle.
An employee was in a manlift in a test cell setting up an engine when they fell approximately 47 inches to the floor below. The employee sustained fractures and lacerations to his head, requiring hospitalization.
An employee set down an air power ratchet during assembly operations when the trigger on the air ratchet activated. The employee went to grab the ratchet when his left glove was caught by the socket. The employee s glove wrapped around the socket and the tip of his left thumb was amputated.
The injured employee was working with two other individuals on a V-shaped roof to repair exhaust fan ductwork. The injured employee walked backward up the roof to confirm alignment of an exhaust vent and stepped off the edge of the roof, landing 14.5 feet below onto the next roof level. He landed on his feet, then fell backward, striking his head on a window. The injured employee was hospitalized with a fractured right ankle. Fall protection was not worn at the time.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 336510)
An employee was using a handheld cordless electric torque wrench. The tool's reaction arm came into contact with the employee's left hand, causing an amputation to the middle finger above the first knuckle.
On August 6, 2025, an employee was preparing to weld a metal sheet that goes between containers and weighs 800 pounds. The employee was placing a two-foot wooden brace (4 by 4) under the metal, which was being raised by a crane operator using a magnet. The magnet shifted and caused the load to catch the employee's right index fingertip against the wooden brace, resulting in a fingertip amputation.
An employee was climbing up a ladder to the top of a railcar. The employee slipped and fell from the ladder, striking the coupler of the railcar during the fall. This caused the employee's body to shift, and they landed on their head/nose/face. The employee suffered broken ribs, a broken cheekbone, a broken nose, and internal bleeding.
An employee was working to remove a railcar coupler (approximately 400 pounds) from a rail tanker car prior to abrasive blasting. A forklift was used to hold the weight. While attaching a device to the coupler, the last pin holding the coupler was removed. The coupler fell onto the employee's lower right leg, causing a hairline fracture and an open wound that was approximately 1x3 inches in size.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.