FedEx Freight, Inc.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.

On the loading dock, an employee was pulling freight out of a trailer using a pallet jack. The freight container broke, causing the employee to slip and fall. The employee sustained a fractured hip.

An employee was helping to unload freight from a semi-truck when the freight fell and struck them. The employee was hospitalized with injuries to their lower legs.

On June 10, 2024, an employee was delivering a transmission to a customer location. While dragging the delivery, he fell to the floor and suffered a broken hip. He was hospitalized.

An employee was stepping on a dock plate when they slipped and fell. His right hand landed in the pinch point as the dock plate came down, causing the employee's fingers to be crushed; the middle finger was amputated.

An employee was using his left hand to push an axle down the line on a raised track work area while holding the remaining axle back with his right hand. A finger on his right hand was caught between the rail and the dust guard of the axle, resulting in a fracture and a laceration.

An employee was moving metal out of a cart. He had removed one piece and was working to move another when the metal shifted. His right ring finger was crushed between the two pieces, and he suffered a partial amputation to the finger pad at the tip.

A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.

Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.

An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.

An employee was moving a large package from a slide when her left arm got caught between the slide (tilt tray) and the package. She was hospitalized with a fractured left arm.

An employee was operating a switch truck at a rail yard. He got out of the switch truck to unlock a container that was attached to a unit in front of him. The switch truck rolled and pinned the employee against the container. The employee sustained a fractured pelvis, a ruptured spleen, and a possible spinal cord injury.

An employee was sidestepping along the catwalk of a railcar when he lost his balance and fell approximately 4 feet to the ground. The employee's right hip was fractured.

An employee was working to realign the two top sections of a set of collapsible rollers (trailer-on-flatcar rollers). The rollers suddenly fell into place and pinched her left index fingertip against the lower sections. She suffered a partial amputation to the fingertip.

An employee was delivering a package. A dog bit the employee in the abdominal area, and the employee was hospitalized.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.