Tin Man Enterprises

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee was standing on the surface of a steel beam about two feet wide. He slipped and fell backward, landing on the concrete ground about 20 feet below. The employee sustained a broken pelvis.

An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.

An employee was working on a platform, raised 6 to 8 feet in the air, to get something off a rack. The employee fell from the platform to the ground and sustained a head injury and injury to multiple body parts.

An employee was preparing to unjam an auger shaft while standing on a forklift-elevated, job-made platform. The employee's wrench slipped off the equipment, causing them to lose their balance and fall. The employee landed on the ground 14 feet below and suffered fractures to the orbital bone, left elbow, and lower back.

An employee was walking to exit the work area when steel walls fell on them, resulting in fractures.

Employees were working to apply sealant to a customer's leaking foundation. The injured employee was digging out dirt and passing it to another worker. The hole that was being dug collapsed and the injured employee became trapped in dirt/mud from the waist down. The employee sustained a fractured pelvis.

An employee was cutting a tack weld with a grinder when the grinder exploded. The employee sustained lacerations to their right index finger.

An employee was standing on a concrete wall, stripping concrete forms using a pry bar. The employee fell from the wall to the ground 9 feet below, suffering a fractured back and arm.

The injured employee was team lifting a steel tube from an A-frame dolly using the shoulder-to shoulder method with another employee. They lifted one end of the tube so the A-frame could be wheeled out of the way by a third employee. Once the dolly was clear, they lowered the tube down on top of another tube. After setting the tube down, it slipped off the lower tube and fell. The moving tube pulled the injured employee's glove and his left middle fingertip was caught between the two tubes. The employee sustained an avulsion to their finger.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.