Struck by running powered equipment unspecified · Cuts, lacerations, punctures without injury to internal structures
At a glance
Federal OSHA recorded a severe workplace injury
at Professional Power Products, Inc., 448 West Madison Street, DARIEN, WISCONSIN 53114
on — Cuts, lacerations, punctures without injury to internal structures, affecting the Head and extremities.
Final narrative
An employee entered the back of a CNC laser machine and was caught by the CNC laser head, resulting in lacerations to their left thigh and ankle as well as the back of their head. The machine was not locked out/tagged out at the time.
Hospitalized Head and extremities Laser cutting machinery
More severe injuries at Professional Power Products, Inc.
An employee was installing insulation in a wall panel when the panel fell on top of them, resulting in leg and back injuries that required hospitalization.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
More severe injuries in this industry (NAICS 335313)
On August 25, 2025, an employee was cleaning a tablet press machine. The employee's right hand was near the point of operation when the machine cycled, resulting in an amputation to the tip of their right thumb.
An employee was descending a scaffold ladder when they fell onto a step ladder and then onto the floor. The employee sustained fractures to their L1, L2, and L3 vertebrae.
An employee was walking and stepped over a 16.72-inch wall when their boot contacted the top of the wall, causing them to fall forward and strike the concrete floor with the left side of their body. The employee sustained fractures to four of their left ribs.
An employee was operating a pedal operated power press. Their left-hand fingers were caught between the dies when the machine cycled and the employee sustained amputations to two fingers.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.