Caught, entangled in running powered equipment normal operation · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at ELECTRO SWITCH CORP., 175 R Union Street, ROCKLAND, MASSACHUSETTS 02370
on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was operating a pedal operated power press. Their left-hand fingers were caught between the dies when the machine cycled and the employee sustained amputations to two fingers.
Amputation Other finger(s) n.e.c. Stamping machinery, presses except printing
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 335313)
On August 25, 2025, an employee was cleaning a tablet press machine. The employee's right hand was near the point of operation when the machine cycled, resulting in an amputation to the tip of their right thumb.
An employee entered the back of a CNC laser machine and was caught by the CNC laser head, resulting in lacerations to their left thigh and ankle as well as the back of their head. The machine was not locked out/tagged out at the time.
An employee was descending a scaffold ladder when they fell onto a step ladder and then onto the floor. The employee sustained fractures to their L1, L2, and L3 vertebrae.
An employee was walking and stepped over a 16.72-inch wall when their boot contacted the top of the wall, causing them to fall forward and strike the concrete floor with the left side of their body. The employee sustained fractures to four of their left ribs.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.