Caught or wedged between objects nonrunning · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at General Motors, 1500 East Route A, WENTZVILLE, MISSOURI 63385
on — Amputations involving bone loss, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was moving a tool box when its top drawer started to open. While the employee was stabilizing the tool box and drawers, their left middle and ring fingertips were amputated through the nailbeds. The fingertips were surgically reattached.
Amputation Finger or thumb tip(s), nail(s) Boxes, crates, cartons
An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.
An employee dropped off an empty dolly train and moved his tugger over to a full material train that was waiting. He was then walking around the material train to validate it, and was struck by a forward-moving forklift. The forklift tire rolled over the employee's right foot/toes, fracturing four toes. The employee was hospitalized.
An employee was conducting assembly line activities on the front driver's side of a van when she tripped and fell backward to the floor, landing on her back. The employee sustained a compression fracture to a vertebra.
An employee was driving a forklift when it struck a structural steel column, which separated the mast from the forklift. The right side of the employee's skull struck a front support post in the forklift cabin, and the employee suffered a neck fracture and a concussion.
An employee was trying to get into a vehicle that was on a slow moving conveyor in order to move the vehicle to another conveyor for inspection. A second employee was already in the vehicle. When the second employee started driving the vehicle, the first employee lost his balance and fell to the floor, fracturing his hip.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.
More severe injuries in this industry (NAICS 336111)
An employee was using a battery-powered torque tool to fasten a bolt. The tool was activated and the socket of the tool rotated and pulled in their gloved left hand. The employee sustained a left index fingertip amputation.
An employee was inspecting a casted part that weighed 330 pounds. The part fell from a lift assist onto the employee, striking his upper right arm and head. He suffered burns to the upper right arm and was hospitalized.
On June 4, 2025, an employee was skimming molten aluminum when it dripped down from the skimming spoon onto the employee's left pant leg, burning the top of their left foot. The employee was hospitalized and required surgery.
On June 3, 2025, the injured employee was setting a mold with a co-worker when the mold was displaced and caught their right hand against the stop block. The employee sustained a fracture and partial amputation of their middle finger.
An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.
An employee was on a step ladder in a store aisle, making room on shelving for merchandise. She fell from the step ladder to the floor, suffering two fractures in her left leg. She was hospitalized, requiring surgery.
An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.
An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.