Struck by running powered equipment during maintenance, cleaning, testing · Thermal burns degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at MGPI Processing, Inc., 1300 Main Street, ATCHISON, KANSAS 66002
on — Thermal burns degree unspecified, affecting the Other finger(s) n.e.c..
Final narrative
On May 3, 2025, at approximately 8:45 AM, an employee was cleaning the surface of a sonic bag sealer with an emery cloth when the sealer activated and closed on their fingers. The employee sustained burns to three fingers on their right hand. The machine was not locked out at the time.
Hospitalized Other finger(s) n.e.c. Packaging, wrapping, bundling machinery
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 115114)
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was riding a manlift (elevator) up to the fourth floor of a building. His right leg was struck and pinched by the third-floor structure as he ascended. The leg was broken.
An employee had been using an air gun to blow cotton off the moving parts inside of the length/strength cabinet. The employee went to grab some cotton that was still stuck on the length/strength breaker bracket (above the rear jaw cylinder) when their left fourth finger became pinched. The employee sustained an amputation through the distal phalanx.
An employee was operating a forklift in a warehouse with closed bay doors. The forklift was in operation for about 90 minutes in the enclosed area. Two employees working in the area developed carbon monoxide poisoning and were hospitalized.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.