Injured by object handled by person n.e.c. · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at Scan-Pac Manufacturing, Inc., N84W13480 Leon Road, MENOMONEE FALLS, WISCONSIN 53051
on — Amputations involving bone loss, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was removing a mold (weighing over 50 pounds) from a press machine to take the mold to another location. When he put the mold down, it dropped onto his finger and amputated his fingertip at the knuckle.
HospitalizedAmputation Finger or thumb tip(s), nail(s) Dies, molds, patterns
An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.
A maintenance employee was working to place a 120-pound metal screen on top of a machine before installation, with the help of another employee. The injured employee's right ring finger was pinched between the screen and the machine and the fingertip was partially amputated.
An employee was assisting three coworkers with loading a fall protection metal storage cage onto a wooden pallet. Their right index finger was pinched between the pallet and the bottom of the cage, resulting in a fingertip amputation.
An employee was helping another employee load stock material onto a press brake when the stock slipped. The injured employee's right index finger was caught between the press brake die and the stock, resulting in amputation at the first knuckle.
An employee was moving a toolbox from a pallet to the sales floor when his left middle finger got caught between the toolbox and the concrete floor, resulting in a fingertip amputation of the distal digit.
More severe injuries in this industry (NAICS 332117)
An employee was running a sizing press. He was changing totes and needed to verify the sizes on the new tote of parts. While he was removing a part, the machine, operating in inch mode, crushed his left index fingertip between the pin, punch, and die. The employee sustained an amputation to left index finger. The machine was unguarded at the time of the incident.
At 9:20 a.m. on Saturday August 17, 2024, an employee was running a sizing press machine when his right hand was caught in the press. The employee sustained an amputation of his ring finger at the knuckle and injuries to his index, middle, and little fingers that required stitches.
An employee was working on a sizing press. They were putting a part into the sizing press when the machine cycled. The employee sustained an amputation to their right index finger.
An employee was cleaning the tooling in a mechanical power press when the ram drifted down and caught the employee's right middle finger. Their fingertip was amputated.
An employee was taking a break from unloading the sintering furnace. His left hand became caught between two conveyor belts resulting in amputation of the index fingertip.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.