Mott Corporation

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was running a sizing press. He was changing totes and needed to verify the sizes on the new tote of parts. While he was removing a part, the machine, operating in inch mode, crushed his left index fingertip between the pin, punch, and die. The employee sustained an amputation to left index finger. The machine was unguarded at the time of the incident.

An employee was removing a mold (weighing over 50 pounds) from a press machine to take the mold to another location. When he put the mold down, it dropped onto his finger and amputated his fingertip at the knuckle.

At 9:20 a.m. on Saturday August 17, 2024, an employee was running a sizing press machine when his right hand was caught in the press. The employee sustained an amputation of his ring finger at the knuckle and injuries to his index, middle, and little fingers that required stitches.

An employee was working on a sizing press. They were putting a part into the sizing press when the machine cycled. The employee sustained an amputation to their right index finger.

An employee was taking a break from unloading the sintering furnace. His left hand became caught between two conveyor belts resulting in amputation of the index fingertip.

An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.

An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.

An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.

An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.

An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.