Caught, entangled in running powered equipment normal operation · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at MPP Holdings, LLC, 700 Martha Street, PUNXSUTAWNEY, PENNSYLVANIA 15767
on — Amputations involving bone loss, affecting the Other finger(s) n.e.c..
Final narrative
At 9:20 a.m. on Saturday August 17, 2024, an employee was running a sizing press machine when his right hand was caught in the press. The employee sustained an amputation of his ring finger at the knuckle and injuries to his index, middle, and little fingers that required stitches.
Amputation Other finger(s) n.e.c. Stamping machinery, presses except printing
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 332117)
An employee was running a sizing press. He was changing totes and needed to verify the sizes on the new tote of parts. While he was removing a part, the machine, operating in inch mode, crushed his left index fingertip between the pin, punch, and die. The employee sustained an amputation to left index finger. The machine was unguarded at the time of the incident.
An employee was removing a mold (weighing over 50 pounds) from a press machine to take the mold to another location. When he put the mold down, it dropped onto his finger and amputated his fingertip at the knuckle.
An employee was working on a sizing press. They were putting a part into the sizing press when the machine cycled. The employee sustained an amputation to their right index finger.
An employee was cleaning the tooling in a mechanical power press when the ram drifted down and caught the employee's right middle finger. Their fingertip was amputated.
An employee was taking a break from unloading the sintering furnace. His left hand became caught between two conveyor belts resulting in amputation of the index fingertip.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.