Exposure through intact tissue · Chemical burns, corrosions second degree
At a glance
Federal OSHA recorded a severe workplace injury
at Caravels, LLC, 2789 Georgia Highway 21 South, RINCON, GEORGIA 31326
on — Chemical burns, corrosions second degree, affecting the Ears and facial region unspecified.
Final narrative
An employee was preparing to remove enamel from copper leads by soaking them in a liter container of formic acid when one of the bottles fell. The employee was splashed with formic acid, resulting in first- and second-degree burns to his face.
Hospitalized Ears and facial region unspecified Carboxylic acids, acetic acid
The injured employee was cleaning up tools and equipment around a transformer that was being assembled. Other employees were removing the mobile work platforms from around the connections lattice of the transformer. The connections lattice fell over on top of the injured employee, causing fractures to their ribs, pelvis, and foot.
An employee was pushing the head unit on an automated cable-wrapping machine along its roller bar tracks. The employee's right hand was caught between the head unit and a support mount on the roller bar tracks, causing a partial amputation to the little finger.
An employee was elevating a scissor lift while inside the lift's basket when one side of the scissor lift's guardrail system became caught on the guardrail system of an adjacent stationary lift. The scissor lift the employee was in then toppled over and fell to the ground. The employee sustained fractured ribs on the left side of his body.
An employee was working on I-beams while replacing a grating system when he fell approximately 20 feet to an electrical panel below. He suffered broken ribs, a broken leg, and a possible punctured lung.
An employee was removing a hose from a chemical tank after filling the tank with hexamethylenediamine (HMD). He checked the line to ensure that the hose was clear, then disconnected the hose at the connection. Residual chemical sprayed onto his face, causing a second-degree burn. He was hospitalized.
A shipping/receiving operator was working on a loading rack, loading a railcar. A 2-inch discharge cap failed and released pressure along with sulfuric acid from the railcar. The acid sprayed onto the employee, who suffered burns to the chest and the lower facial area. The employee was hospitalized.
An employee was pressure washing truck scales when they were splashed with water and an unknown chemical on their leg and immediately experienced a burning sensation. The employee was hospitalized with a chemical burn and required surgery.
An employee was on a ladder disconnecting a 1-inch hose, known to have last carried acrylic acid that had been drained. When the hose was disconnected, residual acid dripped onto the employee's shoulder/arm area, causing a second-degree chemical burn.
Employees were removing scaffolding that was used to repair an ion exchange tank. The line was undergoing the regen process when a piece of scaffold struck a PVC pipe that transported hydrochloric acid (HCl). The injured employee was placing material inside a scaffold rack when he was sprayed in the face with HCl and sustained chemical burns to his eyes, face, chest, right arm, and left leg.
More severe injuries in this industry (NAICS 334416)
An employee was being trained on a winding machine when his glove became stuck on tape. While freeing his glove, the machine was activated and started winding. His arm was pulled into the machine, resulting in a fractured left forearm.
The injured employee was cleaning up tools and equipment around a transformer that was being assembled. Other employees were removing the mobile work platforms from around the connections lattice of the transformer. The connections lattice fell over on top of the injured employee, causing fractures to their ribs, pelvis, and foot.
An employee was using a crane and an L-shaped lifting device to remove a coil of aluminum material off a de-reeler. The L-shaped lifting device got hung up on part of the de-reeler. The L-shaped lifting device slipped off and struck the employee in their right side. The employee sustained internal lacerations to their liver and kidney.
An employee was setting up a machine. The machine's jog function was activated while the employee's left hand was on the rotating table of the machine, and the hand was pulled into the next station of the machine. The employee was hospitalized with a laceration to the wrist that cut an artery, and they required surgery. The machine was not locked out/tagged out at the time.
An employee was changing out a mold from a machine and laying it on a table. The mold slipped and hit their left index fingertip, resulting in an amputation that required surgery.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.