105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Crash Champions Collision Repair SA 1000 Oaks

Struck by rolling, sliding, or shifting objects non-running · Amputations, avulsions, enucleations unspecified

Federal OSHA recorded a severe workplace injury at Crash Champions Collision Repair SA 1000 Oaks, 3711 Thousand Oaks Boulevard, SAN ANTONIO, TEXAS 78247 on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).

An employee was moving a truck bed (200-300 lbs.) on a cart/carrier to the paint prep area. The truck bed slid toward him and his finger got caught between the truck bed and the carrier. The employee's fingertip was partially amputated.

Amputation Finger or thumb tip(s), nail(s) Open cargo areas vehicle and machine

Greenbrier Rail Services

An employee was using his left hand to push an axle down the line on a raised track work area while holding the remaining axle back with his right hand. A finger on his right hand was caught between the rail and the dust guard of the axle, resulting in a fracture and a laceration.

New Millennium Building Systems

An employee was moving metal out of a cart. He had removed one piece and was working to move another when the metal shifted. His right ring finger was crushed between the two pieces, and he suffered a partial amputation to the finger pad at the tip.

Triad Metals International

A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.

Renegade Group LLC

Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.

Universal Stainless & Alloy Products Inc.

An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.

Protech

An employee was kneeling on his left knee with his right knee up while taking measurements of a car he was working on. As he switched knees, and put his right knee on the ground with his left knee up, his right hip dislocated and he bent forward onto his hands. The employee was hospitalized and required hip surgery.

Caliber Collision Center

An employee was finishing up using a resistance welder on a vehicle. After finishing, he removed his gloves and picked up the resistance welding arm with his left hand on the hydraulic cylinder and his right hand on the handle. The button on the handle was activated and the hydraulic cylinder engaged, catching the tip of his left little finger and resulting in a fingertip amputation.

Caliber Collision

An employee was working to attach a safety handle to the cable portion of a pulley system designed to aid in the operation of a resistance welder. The tension on the cable was disengaged, then reengaged while the employee's left hand was on the top of the pulley system. The cable caught the tip of the employee's left little finger, causing an amputation at the first joint.

Service King Collision McDonough

At about 8:00 a.m. on August 8, 2025, an employee was holding a metal coupon for another employee to use in demonstrating spot-welding technique to a third, student employee. A metal hole puncher was activated and crushed the employee's left middle finger, resulting in an amputation to the finger. The incident occurred during a training activity.

Caliber Holdings LLC.

An employee was closing the gate at the end of the day when it missed a latch and came off its track. The gate fell onto him, resulting in hospitalization with a fractured femur that required surgery.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.